ZFX-W1602 Adjustable Thermostat Switch with Digital Display Intelligent Temperature Controller High-Precision Incubator

Based on 0 reviews. - Write a review

$5.99

Ex Tax: $5.99

Stock: In Stock
Model: EB0047097
SKU: EB0047097

Available Options

Voltage

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Specifications:

Product model: ZFX-W1602

Power supply voltage: 12V DC / 24-60V DC / 220V AC

Temperature measurement range: -50 ℃-110 ℃

Temperature measurement accuracy: 0.3

Resolution: 0.1

Temperature control accuracy: 1 ℃

Sensing line: NTC / 10K / 3435 L = 1m

Output type: direct output

Diameter: 86mm

Parameter Settings:

1. In the setting mode, long press the SET button for 5 seconds, P0 will be displayed, and short press the SET button to switch the H / C (H is heating, C is cooling).

2. Set the stop temperature, press the SET button once, the screen flashes, and press the up and down keys to directly set the desired temperature.

3. Press and hold the SET button for 5 seconds to display P0. Press the up and down buttons to switch to P1, and then press the SET button once again to set the return difference (press the up and down buttons to adjust). If the heating mode wants to be set to 35 ℃ ~ 37 ℃ Time, the stop temperature is set to 37, and the return difference is set to 2.

4. Indicator light: SET light is on, indicating that the parameter is being set: OUT indicator flashes to indicate the start delay, and constant light indicates the output

5. Nixie tube: display LLL as sensor abnormality: display HHH as sensor causing short circuit or exceeding the measurement range, when the temperature is flashing, it is in the setting or alarm state.

Parameter	Features	Range	Defaults
PO	Operating mode	Heating / cooling H / C	H
P1	Backlash setting	0.1~30	2
P2	Set an upper limit	+5~110℃	110℃
P3	Set lower limit	-50~-105℃	-50℃
P4	Temperature correct	-10℃~10℃	0℃
P5	Delayed start	0~10 Min	0 Min
P6	High temperature alarm	-49~110℃	110℃
P7	Low temperature alarm	-50~109℃	-50
P8	Data lock	OFF/ON	OFF

P0: Heating and cooling mode H / C

Low temperature start is heating mode, set to H, for example, the actual temperature is 20 ℃, need to control the temperature between 35 ~ 37 ℃, we set P0 to H heating mode

High temperature start is cooling mode, set to C, for example, the actual temperature is 38 ℃, need to control the temperature between 23 ~ 27 ℃, we set PO to C cooling mode

P1: Hysteresis setting

In heating mode: To control a temperature ranging from 37 ° C to 39 ° C, the actual temperature is less than this range, for example, 25 ° C, it is necessary to set the heating mode H, the stop temperature is set to 39 ° C, and P1 is set to 2 ( Set the stop temperature 39 ℃ -backlash = start temperature 37 ℃), that is, the temperature is lower than 37 ℃ and the start temperature is higher than 39 ℃.

In cooling mode: the control range is between 25 ° C and 27 ° C, the actual temperature is 37 ° C, and the actual temperature is higher than this range, for example, 39 ° C, it must be set to cooling mode C, the stop temperature is set to 25 ° C, P1 Set to 2 (set stop temperature 25 ℃ + hysteresis 2 = start temperature 27 ℃), that is, the temperature starts above 27 ℃, and stops above 25 ℃

P2: Set the upper limit: For example, if you set P2 to 70 ℃, then your maximum temperature will be intelligently set to 70 ℃

P3: Set the lower limit: For example, if you set -20 ℃ for P3, then the minimum value of your temperature is intelligently set to -20 ℃

P4: Temperature correction: temperature after correction (P4) = temperature before correction + correction value

P5: Delay start: After setting, the controller will not start immediately when it is output, and it will start only after the time you set (non-compressor)

Control can be set to 0)

P6: High temperature alarm: when the measured value is greater than the set alarm value, the screen flashes and there is a drop alarm sound,

P7: Low temperature alarm: when the measured value is less than the set alarm value, the screen flashes and there is a drop alarm sound,

P8: Data lock function: P7 is adjusted to ON to save the currently set parameters without modification

Package Included:

1 x ZFX-W1602 Adjustable Thermostat Switch with Digital Display

1 x Sensor Cable

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!