Search
Search Criteria
Products meeting the search criteria
Content-Length: 2475
>
Description:
1. Working voltage: DC 12-15V(AC 9-12V)
2. Standby current 10MA
3. Working current 40MA
4. Size: 54mm X 27mm X 19mm
5. Weight: 23.5 g
6. Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VD..
$24.99
Ex Tax:$24.99
>
>>>Manual: Click here to open..
$14.99
Ex Tax:$14.99
>>>Manual: Click here to open..
$12.99
Ex Tax:$12.99
>>>Manual: Click here to open..
$12.99
Ex Tax:$12.99
Description : The current sensor model : ACS712ELC5v power supply, Onboard power light indicatorModule can measure +5 or -5 current, corresponding to the analog output of 185 mv/AWhen no current through the test, the output voltage is the VCC/ 2Size of the PCB board : 31 x13 (mm) (mm)Note: ACS712 ..
$17.99
Ex Tax:$17.99
Description: 1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and anal..
$8.99
Ex Tax:$8.99
>
Description: Rotary Angle Sensor is based on the 10k the adjustable potentiometer knob Angle sensor module, the output is 0 ~ VCC simulation values, the output voltage will be as the potentiometer rotation Angle and linear changes. Apply to 3.3 V and 5 V of the SCM system, and the board are ..
$12.87
Ex Tax:$12.87
>>>Code for : Click here to open..
$13.99
Ex Tax:$13.99
>
Feature:
Name: AM2301 temperature and humidity module
Power supply voltage vin: DC3.3-5.5V
Output signal: Single bus digital signal
Display resolution: 0.1°C or 0.1%RH
Temperature detection range: -40~80°C
Temperature detection accuracy: +-0.5°C
Humidity detection range: 0..
$24.99
Ex Tax:$24.99
Voltage: DC5V Precise details>> Precise details: Feature:AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor...
$27.99
Ex Tax:$27.99
>
Features:
This board is the simplest way to create a project with multiple capacitive touch sensors.
No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins.
When a capacitive load is detected (e.g. a pers..
$46.99
Ex Tax:$46.99
5pcs BH1750FVI Digital Light Intensity Sensor Module For AVR 3V-5V Power Features: ROHM original chip BH1750FVI Sensor built 16 bit AD converter Digital output directly, omitting complex calculations and calibration Not distinguish ambient light Spectral characteristics close to visual sensit..
$13.99
Ex Tax:$13.99