Search
Search Criteria
Products meeting the search criteria
>
Description:
1. Working voltage: DC 12-15V(AC 9-12V)
2. Standby current 10MA
3. Working current 40MA
4. Size: 54mm X 27mm X 19mm
5. Weight: 23.5 g
6. Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
Note:
Package does ..
$16.99
Ex Tax:$16.99
>>>Manual: Click here to open..
$10.99
Ex Tax:$10.99
>>>Manual: Click here to open..
$10.99
Ex Tax:$10.99
>>>Manual: Click here to open..
$9.99
Ex Tax:$9.99
Voltage: 5V(USB) Precise details>> Precise details: Description : The current sensor model : ACS712ELC5v power supply, Onboard power light indicatorModule can measure +5 or -5 current, corresponding to ..
$13.00
Ex Tax:$13.00
Description: 1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and anal..
$7.99
Ex Tax:$7.99
>>>Code for : Click here to open..
$9.99
Ex Tax:$9.99
Feature: Name: AM2301 temperature and humidity module Power supply voltage vin: DC3.3-5.5V Output signal: Single bus digital signal Display resolution: 0.1°C or 0.1%RH Temperature detection range: -40~80°C Temperature detection accuracy: +-0.5°C Humidity detection range: 0-99.9%RH Humidity detection..
$16.99
Ex Tax:$16.99
Feature:AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reli..
$18.99
Ex Tax:$18.99
Description:Operating voltage: 3.3VMeasuring range: 4-8 inch (10-20cm)I2C InterfaceBuilt-in APDS-9960 sensor, providing ambient light and color measurement, proximity detection and non-contact gesture detection. With this RGB and gesture sensor, you can control a computer, a microcontroller, a robot..
$15.99
Ex Tax:$15.99
>
Features:
This board is the simplest way to create a project with multiple capacitive touch sensors.
No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins.
When a capacitive load is detected (e.g. a pers..
$29.99
Ex Tax:$29.99
3pcs BH1750FVI Digital Light Intensity Sensor Module For AVR 3V-5V Power Features: ROHM original chip BH1750FVI Sensor built 16 bit AD converter Digital output directly, omitting complex calculations and calibration Not distinguish ambient light Spectral characteristics close to visual sensit..
$9.99
Ex Tax:$9.99