W3003 12V/24V/220V Microcomputer Digital Display Intelligent Temperature Controller Electronic For Burner Fuel Machine Controller

Based on 0 reviews. - Write a review

$8.99

Ex Tax: $8.99

Stock: In Stock
Model: EB0045967
SKU: EB0045967

Available Options

Voltage

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Specifications:

Supply voltage: 12V/24V/220V

Load power: 120/240/1500W

Temperature control range: 0-450 °C

Temperature range: 0-450 °C

Temperature control accuracy: 0.1 °C

Measurement input: k-type thermocouple

Output type: direct output

Output capacity: up to 10A

Mounting aperture: 73mm

Aperture: 4mm

Size: 60*45*31mm

Introduction:

Setting parameter table:

Code	Description	Setting range	Factory settings
P0	Starting temperature	0-450℃	00
P1	Stop temperature	0-450℃	00
P2	Temperature correction	-10-10℃	0
P3	Delayed start	0-10 min	0

- P0 sets the starting temperature

Press the setup button to enter the internal menu. The default display is T0. Press the setup button again to set the desired startup temperature via the up and down buttons.

- P1 sets the stop temperature

b Set the button to enter the internal menu, the digital display is P0, switch to P1 through the up and down buttons, press the setting button again, and set the required stop temperature through the up and down buttons.

- P2 set temperature correction

In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by the up and down buttons. In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 °C. If the inspection temperature value is 1 °C smaller than the actual temperature value, the calibration temperature to be set is 1 °C. Temperature + - Correction temperature = actual temperature.

- P3 sets delayed start

In the same way, enter the internal menu, switch to P3 by the up and down keys, press the setting button again, and set the required delay time by the up and down buttons (the unit is minute > delay start is generally used for compressor refrigeration, if needed for refrigerator freezer, This value needs to be set. The value of the compressor back pressure is set to 3-6 minutes. If you are not using it to control the compressor or do not need the delay function, skip this item.

Heating mode setting method:

Setting method: starting temperature <stop temperature (program automatically determines working mode is heating mode)

Setting method:

Press the SET button to enter the internal menu, set the startup temperature by setting the P0 value, and set the stop temperature by setting the P1 value.

Use Cases:

Control the water heater, heat it to 50 °C to stop, and the temperature will fall back to 40 °C to start heating again. How to set it?

Step 1: Determine the working mode as heating mode, starting temperature <stop temperature

Step 2: Press the SET button to enter the internal menu, select P0 and press the SET button to set the P0 value to 40 °C.

Step 3: Press the SET button to enter the internal menu, select P1 and press the SET button to set the P1 value to 50 °C.

Cooling mode setting mode:

Setting method: Start temperature > stop temperature (program automatically determines the working mode is cooling mode)

The setting method is as above.

Note:

When setting the heating mode, if you accidentally set the set temperature value upside down, the output indicator will not light, the load will not work. If the above situation occurs after the setting is completed, you can check whether the set temperature value is reversed. .

Package Included:

1 x Digital Display Intelligent Temperature Controller

W3003-12V24V220V-Microcomputer-Digital-Display-Intelligent-Temperature-Controller-Electronic-For-Bur-1428282

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!