Multi-function Adjustable Signal Generator 2-10V Signal Generator Sine Wave 4-20mA PWM Pulse Signal Source Support RS485 Modbus Communication
- Stock: In Stock
- Model: EB004792
- SKU: EB004792
Notes: This module is divided into two versions, the signal generator and the version with MODBUS function. The difference is that the power supply with MODBUS version has RS485 communication interface, which can be set or data collected by the host computer software, or with the computer. , PLC, DCS, smart meters and other equipment for communication! Other than that, the other features are the same!
Restore factory settings: when power off, press and hold P1, then power on and then release the button, it will be restored.
Calibration function: The module source mode has voltage and current calibration function. If there is any display error, it can be calibrated by the following methods:
First power off, press and hold the code switch to power on, it will enter the calibration voltage and current mode, use the multimeter output voltage (quantity GND and 2-10V) or current (quantity GND and 4-20MA), rotate and adjust to display consistent with the multimeter After three seconds, the power can be cut off, and the accuracy can be corrected to less than 0.1%!
Specifications:
Supply voltage: 7-12V
Product features: PWM mode, pulse mode, source mode, sine wave mode
PWM mode: voltage, frequency, duty cycle are adjustable, the accuracy is up to 0.1%; voltage range: 1-24V, frequency range: 1-150KHZ, duty cycle range: 0-100%
Pulse mode: start delay time T0: 0-60S, high time time T1: 0-60S, low time time T2: 0-60S, pulse number PulseNun: 1-60000, accuracy 0.001S
Signal source mode: voltage source 2-10V adjustable, current source 4-20mA adjustable
Sine wave mode: 1-1000HZ adjustable
Signal load capacity: output current maximum 30mA (Note: This product is the output of the signal source, can not directly drive high power load)
Ambient temperature: -10-+70°C
Module size: length 79mm width 43mm height 410mm
Opening size: length 76mm width 39mm
Weight: 53g
>>PC Software
Package Includes:
1 x Signal Generator
1 x Modbus(optional)
Details Pictures:
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
