ADO204 Handheld Digital Storage Oscilloscope 7 Inch Touch Screen 4 Channel Probe 100MSa/s Digital Multimeter Oscilloscope for Car Repair

Based on 0 reviews. - Write a review

$599.99

Ex Tax: $599.99

Stock: In Stock
Model: EB004588
SKU: EB004588

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Description:

Model

ADO204

Channel

Bandwidth（MHZ）

Maximum real-time sampling rate

100 MSa/s

Vertical resolution

8bit

Vertical gear (1, 2, 5 steps)

10mv-5v （Probe gearx1）

100mv-50v（Probe gearx10）

1v-500v（Probe gearx100）

Vertical accuracy

+/-%3

Impedance

1MΩ 25pF

Coupling method

DC/AC

Renhotec

40V（X1）；400V（X10）Can measure 220V voltage；（X100）Can measure 2000V voltage

Time base range

25ns-5s; 100ms-5s Scan mode(scan)

Storage depth

16kx4

Trigger mode

Automatic, normal and single

Trigger type

Rising edge, falling edge

Automatic detection

Support (20Hz-20MHz)

Measurement

Amplitude, maximum, minimum, frequency, period, duty cycle

Cursor measurement

Time, voltage

Screen

7 inch,1024x600

Multimeter

have

Count value

4000

DC voltage

0 - 1000V

AC voltage

0 - 1000V

Resistance

0 - 60.00MΩ

Capacitance

0 - 100μF (At 100μF, the charging time is more than 30 seconds)

Diode

0 - 6.0V

Trigger is introduced:

Trigger: And in order to synchronize the scanning signal and measured signal, can set some conditions, the measured signal is constantly compared with those conditions, only when the measured signal to satisfy the conditions to start scanning, so as to make the scanning frequency is the same as the measured signal or exist integer times, which is synchronous Is called a trigger, the technology that we call the trigger condition.

Trigger condition: used as the trigger condition in the form of many, the most commonly used is the most basic edge trigger, the change of the measured signal (i.e., signal rising or falling edge) compared with a certain level, when the signal changes in some selected way to achieve the electricity at ordinary times, generate a trigger signal, start a scan trigger level can be selected in the 0 v, when the measured signal from low to high across the electricity at ordinary times, have a scan, thus obtained and measured signal synchronous scanning signal .

Trigger mode: Automatic refers to whether meet the trigger condition, real-time refresh waveform, the waveform oscilloscope screen usually appear to be normal shake refers to satisfy the trigger condition to trigger, stationary wave, the single refers to capture only meet the waveform of the trigger condition, for the first time will stop after capture.

Function of ignition:

(1) Ignition is introduced.

1) Type of ignition system

The traditional ignition system with a distributor has long been used in cars and has been gradually replaced by a direct ignition system (DIS).

There are three types of direct ignition systems:

▲ The dual ignition system (DEC) using double-end output ignition coils is used.

▲ Single ignition system (CPC) using single end output ignition coils.

▲ The integrated ignition system (COP) using integrated spark plugs.

The common feature of these three ignition systems is that the output of the ignition coil is sent directly to the spark plug without passing through the distributor.

Package includes:

1 x Oscilloscope

1 x Portable tool box

1 x Multimeter hair pair

4 x 1:1/10: 1 probe

1 x USB cable

1 x 9V battery charger

1 x U Disk

1 x Probe calibration screwdriver/probe marker ring

1 x 0.7mm broken thread needle

2 x Ignition probe

1 x Borescope

1 x User Manual

Note: Do not using this oscilloscope (or multimeter) measurements while connecting USB, as this may damage the instrument!

Details picture:

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!