Menu
Your Cart

K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue

K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
K-3022 50g UV Glue UV Curing Adhesive Acrylic Transparent Plexiglass Glue
$8.63
Ex Tax: $8.63
  • Stock: In Stock
  • Model: EB002829
  • SKU: EB002829
Features:

transparent plastic used in such as: PMMA, PVC, ABS and other self-adhesive and stick each other, as well as glass, metal bonding between the surface dry better.
Use: product packaging, gift wrap, card, acrylic toys, transparent plastic photo frames.
 
Instructions:

The first step, surface treatment: Depending on the material, surface dry and clean, no weak boundary layer;
The second step, coating groups of plastic: continuous coating groups of plastic, do not disperse;
The third step, light positioning: short-term radiation, light hand could not move;
The fourth step is to remove groups of plastic overflow: scraping knife, cloth, paper towel, gently erase excess glue can be dipped in acetone, alcohol;
The fifth step, shadowless glue fully cured: Prolonged high radiation, until fully cured, do not pay attention to the temperature is too high;
Step Six: Clean: soft cloth / paper towel dipped in acetone, alcohol and gently wipe the bonding surface prior to coating shall be dust, oil, dried (glass surfaces should be removed with an organic solvent such as acetone water film), to determine the amount of glue needed (not too much). After James finished adhesive bonding surface collapse, with a little glue evenly distributed so that the beat and expel air bubbles, using a high pressure mercury lamp 20w of 10 ~ 20s can be cured. If the power of the first high pressure mercury lamp irradiation 3-5 seconds to position them, then use a low-power high-pressure mercury lamp for about 5 minutes would be better.
 
Usage:
high mercury UV irradiation, a few seconds to dry. High mercury lamp can not sunlight (sun time will be longer, it is recommended 5 to 20 minutes).

Package Included:

1 x Kafuter K-3022 50g UV Glue 

Detail Pictures:

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!