K-0609 Anaerobic Adhesive Seal Glue Cylindrical Fixed Glue Bearing Locking Anti-loose Strong High Temperature Resistance

Based on 0 reviews. - Write a review

$5.66

Ex Tax: $5.66

Stock: In Stock
Model: EB002879
SKU: EB002879

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Features:

K-0609 (low viscosity / general purpose cylindrical parts holding glue) is a one-component, high-strength, general-purpose, low-viscosity anaerobic cylindrical hole/shaft fitting retaining adhesive. The holding glue cures when it is isolated from the air between two closely fitting metals.

Typical use:

It is used for the hole/shaft fittings with radial clearance <0.1mm to improve the press-fit strength and prevent rust. Used for transitions, interference or clearance fits to repair worn holes - shaft fittings or out of tolerance parts.

Typical applications: assembly of new parts bearings, bushings, small motor rotor shafts, bushings, etc.

Specification:

Chemical composition methacrylate

Appearance green viscous liquid

Viscosity (25 °C, mPa.s) 100～300

Specific gravity 1.05～1.10

Maximum filling radial clearance (mm) 0.13

Shear strength (MPa) ≥10

Working temperature (°C) -54～149

Initial curing time (minutes) ≤15

Full solid (hours) 24

Instructions for use:

· The surface to be coated should be clean, dry and free of grease.

· For the sliding fittings, it is only necessary to apply a circle of glue around the shaft and the guide angle of the sleeve, and rotate it to the left and right during assembly to ensure good coating.

• For press fit, both quilt bonded surfaces are coated with glue and assembled on a suitable high pressure press.

• For heat shrink fittings, the glue should be applied to the shaft and then heated to produce sufficient clearance for free assembly.

• Do not tamper with the assembled parts until they have reached sufficient strength.

Precautions for use:

This retaining adhesive should not be used on plastic parts; to avoid contamination of the original glue, do not pour the poured glue back into the original packaging

Safety Precautions:

This retaining gel contains methacrylate and is irritating to the skin and eyes. If the skin comes into contact, immediately wash it with water; if it touches the eyes, rinse immediately with clean water and go to the hospital for treatment.

Package Included:

1 x Kafuter K-0609 Anaerobic Adhesive Seal Glue

Detail Pictures:

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!