T6703 CO2 Sensor Module Carbon Dioxide Sensor T6703-5K Small Size High Accuracy Infrared Gas Sensor Module

Based on 0 reviews. - Write a review

$45.14

Ex Tax: $45.14

Stock: In Stock
Model: EB0043055
SKU: EB0043055

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

>>>Manual: Click here to open<<<

Overview:

1. The new T6700 series is a miniature NDIR CO2 sensor that has accuracy and reliability of many larger sensors. The new small size allows OEM’s to integrate in to smaller enclosures and equipment and uses significantly less power than many other devices on the market.

2. The Telaire T6703 CO2 Module is configured for applications where CO2 levels are less critical but an assessment of indoor air quality is required, for example in residential applications. Our minimum order requirement reflects the high volumes of these applications.

3. All units are factory calibrated to measure CO2 concentration levels up to 5000ppm, while maintaining accuracy across the range.

Features:

- An affordable gas sensing solution for OEMs.

- Eliminates the need for calibration in most applications with Telaire’s patented ABC LogicTM software.

- A reliable sensor design based on 20 years of engineering and manufacturing expertise.

- Flexible CO2 sensor platform designed to interact with other microprocessor devices.

- Compact design and versatile interface options for simple product integration.

Specifications:

Method	Non Dispersive Infrared (NDIR), gold plated optics,diffusion sampling (with Telaire’s Patented ABC Logic Self Calibrated Algorithm)
Measurement Range	0 to 5000 ppm
Dimensions	1.18 in X 0.61 in X 0.34 in
Dimensions	(30 mm X 15.6 mm X 8.6 mm)
Accuracy*	400-5000 ppm ± 75 ppm or 10% of reading,whichever is greater
Temperature Dependence	5 ppm per °C or 0.5% of the reading per °C,whichever is greater
Stability	< 2% of FS over life of sensor (15 years typical)
Pressure Dependence	0.13% of reading per mm Hg
Calibration Interval	Not required
Response Time	< 3 minutes for 90% step change typical
Signal Update	Every 5 seconds
Warm Up Time	< 2 minutes (operational)
Warm Up Time	10 minutes (maximum accuracy)
Operating Conditions	50°F to 122°F (10°C to 50°C)
Operating Conditions	0 to 95% RH, non-condensing
Storage Conditions	-22°F to 158°F (-30°C to 70°C)

Output
Digital	I2C slave up to 100 kHz
Digital	UART @ 19200 Baud w/Modbus support
PWM Output Mode	Two options, cycle period 1002 ms (~1Hz) or 40 us (25kHz)
Power Supply Requirements	4.5-5.5 VDC
	Peak 200mA (155mA typical)
	Average 25mA (20mA typical)

Applications:

Air Purifiers

Air Conditioning

Home monitoring

Desktop IAQ

Consumer product

Interface Connections:

Designed for male header with 0.1 in (2.54mm) spacing Header not included.

Notes:

1. Tolerance based on span gas of ±2%, which adds to the uncertainty, tested at Standard Ambient Temperature and Pressure (SATP).

2. Subjecting sensors to environments less than 400 ppm may affect accuracy due to ABC Logic algorithm.

3. Based on nominal 5VDC input voltage.For best performance, DC supply should be a regulated, low noise power source.

4. Full accuracy to be achieved utilizing ABC Logic. With ABC Logic enabled, the sensor will typically reach its operational accuracy after 24 hours of continuous operation. Sensor will maintain accuracy specifications with ABC Logic enabled, given that it is at least four times in 21 days exposed to a reference level of 400ppm.

5. Applies when used in typical residential ambient air.

Calibration:

Does not recommend the customer recalibrate the T6703 module after installation. The sensor ABC Logic algorithm will begin after 24 hours, adjusting the sensor measurement resulting in sensor-to-sensor consistency. If immediate consistency is desired, the sensors may be single point calibrated using pre-mixed reference gas or ambient air measured by a reference sensor.

Package Included:

1 x T6703 NDIR CO2 Sensor Module Carbon Dioxide Sensor

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!