Mini Angle Sensor Module Potentiometer Inside Resistance Adjustable GPIO GROVE Connector for Arduino - products that work with official Arduino boards

Description:

AN GLE is a rotary switch Unit,simply having a 10K potentiometer inside. This unit can be used for Continuous singal control, such as volume, brightness, or motor speed.

A potentiometer is a manually adjustable, variable resistor with three terminals. Two terminals are connected to a resistive element, the third terminal is connected to an adjustable wiper. The position of the wiper determines the output voltage. The out voltage is captured and converted by AD on ESP32 on portB.

In M5Stack product system, Normally the Grove color indicates the type of communications.

• Black: Single BUS (AD ,DA ,GPIO)
• Red: I2C
• Blue: Uart
• White:  Others(depends)

The Unit's Grove interface is black, indicating an analog interface that needs to be connected to the M5Core's GROVE B interface.

Product Features:

• Output voltage range: 0 ~ 2500mV
• GROVE interface, support UIFlow: http://flow.m5stack.com/
• Two Le go-compatible holes
• Product Size: 32.2mm x 24.2mm x 21.7mm
• Product weight: 5.6g

Package Included:

• 1x AN GLE Unit
• 1x Grove Cable

Related Link

• Offical Video: https://www.youtube.com/channel/UCozgFVglWYQXbvTmGyS739w

• Forum: http://forum.m5stack.com/

EasyLoader

click to download EasyLoader: https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Unit/EasyLoader_ANGLE.exe

1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader.

2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.

      3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial: https://docs.m5stack.com/#/en/related_documents/establish_serial_connection

Example:

1. IDE

The code below is incomplete. To get the complete code, please click here: https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/ANGLE/.

Example function: Display the digital value converted from the Unit output voltage (0 ~ 4095)

  #include <M5Stack.h>  // select the input pin for the potentiometer  int sensorPin = 36;  // last variable to store the value coming from the sensor  int last_sensorValue = 0;  // current variable to store the value coming from the sensor  int cur_sensorValue = 0;    void setup() {    M5.begin();    pinMode(sensorPin, INPUT);    M5.Lcd.setTextSize(2);    M5.Lcd.setCursor(0, 0);     M5.Lcd.print("the value of AN GLE: ");  }    void loop() {    // read the value from the sensor:    cur_sensorValue = analogRead(sensorPin);    M5.Lcd.setCursor(0, 25);    if(abs(cur_sensorValue - last_sensorValue) > 10){//debaunce      M5.Lcd.fillRect(0, 25, 100, 25, BLACK);      M5.Lcd.print(cur_sensorValue);      last_sensorValue = cur_sensorValue;    }    delay(50);  }Copy to clipboardErrorCopied

2. UIFlow

Schematic: