Laser PM100 Sensor TSP Sensor SDS198 Particle Sensor Dust Sensor Board Controller

Based on 0 reviews. - Write a review

$71.21

Ex Tax: $71.21

Stock: In Stock
Model: EB0047518
SKU: EB0047518

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Introduction:

The PM100 sensor is also known as a full dust or TSP sensor. Using the principle of laser light scattering, SDS198 can obtain the concentration of suspended particles in the air from 1 to 100 microns, using imported lasers and photosensitive parts, the data is stable and reliable; built-in fan, digital output, high integration.

Features:

Size: 71 x 70 x 23mm (L x W x H)

Accurate data: laser detection, stable and consistent;

Fast response: data update frequency 1 second 1 time

Easy to integrate: serial output (or IO port output can be customized), comes with a fan;

High resolution: the resolution of the particles has a minimum diameter of 1 micron;

Scope of application

TSP monitoring, dust monitoring, purification monitoring, road, factory, mine, construction site environmental monitoring;

Using the principle of laser scattering:

When the laser is irradiated to the particles passing through the detection position, weak light scattering occurs, and the light scattering waveform in a specific direction is related to the particle diameter. Real-time particles of different particle sizes can be obtained by waveform classification statistics and conversion formulas of different particle diameters. The concentration of the quantity is obtained according to the calibration method and the mass concentration is uniform with the official unit;

About the service life:

Lifetime is one of the key indicators of laser dust sensors. The laser dust sensor uses high-quality long-life imported laser diodes with a service life of up to 8,000 hours. For applications that do not last long (such as detectors), the default can be used. Configure 1 second continuous measurement. For applications that require continuous use (such as purifiers, air quality monitoring, etc.), you can use the indirect power-on measurement method to extend the service life, for example, 20 seconds for 1 minute, 40 seconds for shutdown. Extended life by up to 3 times

Number	Item	Parameter
1	Measurement output	PM100
2	Range	0-20 mg/m3
3	Supply voltage	5V
4	Maximum operating current	120mA
5	Sleep current	2 mA
6	range of working temperature	-20-50℃
7	Response time	< 6 s
8	Serial data output frequency	1 Hz
9	Sensitivity	1 ug/m3
10	Reproducibility	≤±10%
11	Relative error	≤±15%
12	Product Size	71x70x23mm

Note: The interface spacing is 2.54 pitch, and the 90 degree pin interface is used without special instructions;

Protocol:

Serial communication protocol: 9600 8N1. (rate 9600, data bit 8, no parity bit, stop bit 1)

Serial port reporting communication cycle: 1.2 seconds

Data frame (10 bytes): message header + instruction number + data (6 bytes) + checksum + message tail

Byte number	Name	Remarks
0	Message header	AA
1	Command number	CF
2	Data 1	Reserved
3	Data 2	Reserved
4	Data 3	PM100 low byte
5	Data 4	PM100 high byte
6	Data 5	0 (reserved)
7	Data 6	0 (reserved)
8	Checksum	Checksum
9	End of message	AB

Checksum: The sum of the bytes from data 1 to data 6.

PM100 data content: PM100 (ug/m3) = ((PM100 high byte * 256) + PM100 low byte)

Package includes:

1 x Sensor

Laser-PM100-Sensor-TSP-Sensor-SDS198-Particle-Sensor-Dust-Sensor-Board-Controller-1442825

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Sensor Controller