SIM7600CE 4G/3G/2G Communication Expansion Board GNSS Positioning For Jetson Nano/STM32
SIM7600CE 4G/3G/2G Communication Expansion Board GNSS Positioning For Jetson Nano/STM32
$75.99
Ex Tax: $75.99
- Stock: In Stock
- Model: EB0042528
- SKU: EB0042528
- WiFi: YES
Precise details>>
Precise details:
Documents:
Manual: Click here to open
Schematic: Click here to open
SIM7600X 4G for Jetson Nano Schematic: Click here to open
Code: Click here to open
SIM7X00 Driver: Click here to open
Datasheet: Click here to open
Overview:
The SIM7600CE 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features:
Standard 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Communications Specifications:
| LTE | WCDMA / TD-SCDMA / CDMA 2000 | EDGE | GSM/GPRS | |
| Band | SIM7600A-H: | SIM7600A-H: | Not available | |
| LTE-FDD B2/B4/B12 | UMTS/HSPA+ B2/B5 | |||
| SIM7600E-H: | SIM7600E-H: | GSM/GPRS/EDGE 900/1800 MHz | ||
| LTE-FDD B1/B3/B5/B7/B8/B20 | UMTS/HSPA+ B1/B5/B8 | |||
| LTE-TDD B38/B40/B41 | ||||
| SIM7600CE-T: | SIM7600CE-T: | |||
| LTE-TDD B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B8 | |||
| LTE-FDD B1/B3/B8 | TD-SCDMA B34/B39 | |||
| CDMA 1X/EVDO BC0 | ||||
| SIM7600G-H: | SIM7600G-H: | SIM7600G-H: | ||
| LTE-TDD B34/B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 | GSM/GPRS/EDGE 850/900/1800/1900MH | ||
| LTE-FDD B1/B2/B3/B4/B5/B7/B8 | ||||
| /B12/B13/B18/B19/B20/B25/B26/B28/B66 | ||||
| Generation | 4G | 3G | 2.5G | 2G |
| Emitting power | 0.25W | 0.5W@EGSM900 | 2W@GSM900 | |
| 0.4W@DCS1800 | 1W@DCS1800 | |||
| Data Speed | LTE CAT 4 | UMTS | EDGE | GPRS |
| Uplink≤50 Mbps | Uplink≤384Kbps | Uplink≤236.8kbps | Uplink≤85.6kbps | |
| Downlink≤150 Mbps | Downlink≤384Kbps | Downlink≤236.8kbps | Downlink≤85.6kbps | |
| HSPA+ | ||||
| Uplink≤5.76Mbps | ||||
| Downlink≤42Mbps | ||||
| SIM Card | Normal SIM (Not Included) | |||
GNSS Specifications:
Receiver type
-16-channel
- C/A code
Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
Accuracy
- Position: <2.5m CEP
SMS and Audio Specifications:
SMS
-Supported types: MT, MO, CB, Text, PDU
-Storage: USIM card and ME (default)
Audio feature
-Supports echo cancellation
-Supports noise reduction
Other Specifications:
Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
Dimension: 56.21mm x 65.15mm
Package includes:
1 x SIM7600CE 4G HAT
1 x LTE antenna
1 x GPS External Antenna (B)
2 x USB cable type A male port to micro male port
1 x RPi copper pillar package (2PCS set)
What's on Board:
1. SIM7600CE-T
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
9. SIM card slot: supports 1.8V/3V SIM card
10. TF card slot: allows file/SMS/... storage
11. 3.5mm earphone/mic jack
12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
13. USB to UART interface: for serial debugging, or login to Raspberry Pi
14. MAIN antenna connector
15. AUX antenna connector
16. GNSS antenna connector
17. Power switch
18. Network status indicator
19. Power indicator
20. Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
21. UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
Code: Click here to open: https://www.waveshare.com/wiki/File:SIM7600X-4G-HAT-Demo.7z
SIM7X00 Driver: Click here to open: https://www.waveshare.com/wiki/File:SIM7X00-Driver.7z
Overview:
The SIM7600CE 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features:
Standard 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Communications Specifications:
| LTE | WCDMA / TD-SCDMA / CDMA 2000 | EDGE | GSM/GPRS | |
| Band | SIM7600A-H: | SIM7600A-H: | Not available | |
| LTE-FDD B2/B4/B12 | UMTS/HSPA+ B2/B5 | |||
| SIM7600E-H: | SIM7600E-H: | GSM/GPRS/EDGE 900/1800 MHz | ||
| LTE-FDD B1/B3/B5/B7/B8/B20 | UMTS/HSPA+ B1/B5/B8 | |||
| LTE-TDD B38/B40/B41 | ||||
| SIM7600CE-T: | SIM7600CE-T: | |||
| LTE-TDD B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B8 | |||
| LTE-FDD B1/B3/B8 | TD-SCDMA B34/B39 | |||
| CDMA 1X/EVDO BC0 | ||||
| SIM7600G-H: | SIM7600G-H: | SIM7600G-H: | ||
| LTE-TDD B34/B38/B39/B40/B41 | UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 | GSM/GPRS/EDGE 850/900/1800/1900MH | ||
| LTE-FDD B1/B2/B3/B4/B5/B7/B8 | ||||
| /B12/B13/B18/B19/B20/B25/B26/B28/B66 | ||||
| Generation | 4G | 3G | 2.5G | 2G |
| Emitting power | 0.25W | 0.5W@EGSM900 | 2W@GSM900 | |
| 0.4W@DCS1800 | 1W@DCS1800 | |||
| Data Speed | LTE CAT 4 | UMTS | EDGE | GPRS |
| Uplink≤50 Mbps | Uplink≤384Kbps | Uplink≤236.8kbps | Uplink≤85.6kbps | |
| Downlink≤150 Mbps | Downlink≤384Kbps | Downlink≤236.8kbps | Downlink≤85.6kbps | |
| HSPA+ | ||||
| Uplink≤5.76Mbps | ||||
| Downlink≤42Mbps | ||||
| SIM Card | Normal SIM (Not Included) | |||
GNSS Specifications:
Receiver type
-16-channel
- C/A code
Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
Accuracy
- Position: <2.5m CEP
SMS and Audio Specifications:
SMS
-Supported types: MT, MO, CB, Text, PDU
-Storage: USIM card and ME (default)
Audio feature
-Supports echo cancellation
-Supports noise reduction
Other Specifications:
Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
Dimension: 56.21mm x 65.15mm
Package includes:
1 x SIM7600CE 4G HAT
1 x LTE antenna
1 x GPS External Antenna (B)
2 x USB cable type A male port to micro male port
1 x RPi copper pillar package (2PCS set)
What's on Board:
1. SIM7600CE-T
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
9. SIM card slot: supports 1.8V/3V SIM card
10. TF card slot: allows file/SMS/... storage
11. 3.5mm earphone/mic jack
12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
13. USB to UART interface: for serial debugging, or login to Raspberry Pi
14. MAIN antenna connector
15. AUX antenna connector
16. GNSS antenna connector
17. Power switch
18. Network status indicator
19. Power indicator
20. Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
21. UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
