Raspberry Pi & Orange Pi
>
Overview:
This
Stepper Motor HAT gives your Raspberry Pi the ability to drives two
stepper motors at the same time, supports up to 1/32 microstepping.
User ManualSchematic
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoOnbo..
$28.99
Ex Tax:$28.99
>
Descriptions:-Premium SunFounder Super Kit provides you tutorials to learn about Raspberry Pi, designed for beginners (also experienced hobbyists).
-Raspberry Pi is NOT included, the 40-Pin GPIO Extension Board is for Raspberry Pi 3, 2, Zero & Model B+, A+
..
$27.73
Ex Tax:$27.73
>
Features:1. This Super Kit provides tutorials to learn about Raspberry Pi, suitable for beginners and experienced hobbyists. 2. Detailed user manual provided includes 17 funny experiments with elaborate Fritzing images of wiring and physical experiment diagrams, thorough operational inst..
$81.99
Ex Tax:$81.99
>
Supstronics X200 Multifunction Expansion Board For Raspberry Pi B+
Description:
The expansion board is directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required, and duplicated the 40-pin header of the R-Pi in order to support exi..
$63.99
Ex Tax:$63.99
Specificaiton (←click for more info.)
Description:Lichee Tang uses Anlogic Technologies' EG4S20 as the core unit, 20K logic unit (LUT4/LUT5 hybrid architecture), approximately 130KB SRAM, built-in 32bit bit width 64MBit SDRAM, rich LVDS pin, built-in 12-bit 1MSPS ADC.
- FPC40P, can be connec..
$44.99
Ex Tax:$44.99
Specificaiton (←click for more info.)Description:Lichee Tang uses Anlogic Technologies' EG4S20 as the core unit, 20K logic unit (LUT4/LUT5 hybrid architecture), approximately 130KB SRAM, built-in 32bit bit width 64MBit SDRAM, rich LVDS pin, built-in 12-bit 1MSPS ADC.
- FPC40P, can be con..
$33.99
Ex Tax:$33.99
Descriptions:This smart fan and power expansion board Kits is designed for DIY geeker,
especially for Raspberry Pi lover, compatible with Raspberry Pi 3 / 2B / B+Features:1. Width voltage input: 6V~14V' With power switch
2. Output: DC 5V Max.4A with two channel outputs:
OUT1 for external de..
$23.00
Ex Tax:$23.00
>
Description:Shield for RPi equipped with a 2.8-inch color ILI9340 TFT display with a resistive touch interface, GPIO connector and four buttons.The board includes the STMPE610 display controller that communicates with RPi using the SPI bus and then engages the corresponding pins of the GPIO ..
$20.46
Ex Tax:$20.46
Description:
- For Raspberry 4B Provide 16 Touch Button for your Project
- TTP229-LSF Capacitive touch chip,built-in LDO ,Sensitivity Adjustable
- System would recalibrate when no button is Touched in about 4 SecondsSpecifications:
- Interface: I2C
- Buttons: 16
- Sampling Rate: 8Hz
- Antista..
$16.99
Ex Tax:$16.99
Material: Plastic
Type: Case
Precise details>>
Precise details:
Specifications:Material : Acrylic Case
Design: with the hole for heat sink
Color: Tranparent
Use For: R..
$6.99
Ex Tax:$6.99
>
null
Note:
There is a Protective film on the Acrylic Board to prevent it from Scratches. Please take it off before usingSpecifications:
Material: Acrylic
Color: Transparent
Compability: Raspberry Pi 4B OnlyPackage Included:
1* Acrylic Case..
$7.99
Ex Tax:$7.99
>
Specification:
Fits Raspberry Pi Model B Series/ 4 Model B/ 3 Model B+/ 3 Model B
Material: Acrylic
Color: Tranparent
Support Adding Official Camera Base ( Not included)
Package Included:
1* Acrylic case..
$6.99
Ex Tax:$6.99