Raspberry Pi & Orange Pi
>
Introduction:
It is the original Raspberry Pi camera V2 version, 8 million pixels, compatible with any version of Raspberry Pi.
Note: Raspberry Pi Zero v1.3 Camera Cable needs to be purchased separately for Raspberry Pi Zero v1.3.
Parameters:
● 8,000,0..
$41.99
Ex Tax:$41.99
>
Features:● Raspberry Pi Night Vision Camera, supports all revisions of the Pi● 5 megapixel OV5647 sensor● Adjustable focus distance● Camera specificationsCCD size : 1/4inchAperture (F) : 1.8Focal Length : 3.6mmAngle of View (diagonal) : 75 degreeSensor best resolution : 1080p● 4 screw holes..
$33.99
Ex Tax:$33.99
>
Features:Raspberry Pi Camera, supports all revisions of the PiEmbedded removable IR-CUT filter, eliminating color distortion in the daylightComes with infrared LED, supports night vision5 megapixel OV5647 sensorAdjustable focus distanceSpecifications:500 million pixelsPhotosensitive chip OV5..
$45.99
Ex Tax:$45.99
Overview:RS485&CAN Shield is an industrial communication module for Raspberry Pi, there are on board 2*RS485 Bus and 1*CAN Bus communication interface via SPI interface.
CAN bus and RS485 bus powered through separated isolation power module, signal between the transceiver and the controller is ..
$46.99
Ex Tax:$46.99
>
RTC Clock Module For Raspberry Pi 2 / A+ / B+ / BDescription:
This module is designed specifically for the Raspberry Pi RTC module. Module uses I2C communication mode and Raspberry Pi. Onboard DS1307 clock chip and a button battery guaranteed after 1220 Raspberry Pi power still can remember th..
$8.99
Ex Tax:$8.99
>
Description:The DockerPi SensorHub for obtaining environmental parameters in the Internet of Things.
It integrates various environmental sensors: temperature sensors, humidity sensors, air pressure sensors, lighting and thermal imaging sensors.
You can use them in smart homes.
To obtain vari..
$20.99
Ex Tax:$20.99
>
Overview:There is only 1-ch UART port on the original Raspberry Pi, once it is used for terminal debugging, no more other serial device is allowed. What a poor situation. Now you have 2-ch extra UART, plus 8 programmable GPIOs, just bring this Serial Expansion HAT.Features:Standard Raspberry..
$23.99
Ex Tax:$23.99
>
Features:Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoI2C controlled, using only 2 pinsUp to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)Integrates 5V regulator, up to 3A output current, can be powered fr..
$21.99
Ex Tax:$21.99
>
Specifications: Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)Servo voltage: 5VLogic voltage: 3.3VDriver: PCA9685Control interface: I2CDimension: 65mm x 30mmMounting hole size: 3.0mm Supported Servo: This HAT can be used to drive servos such as:- SG90 Servo- MG90S Servo- MG996R..
$21.99
Ex Tax:$21.99
>
Features:
● Aliminum alloy metal case , strong and hard to protect Raspberry Pi , and has a long using life .
● Lots of hole on the cover , with Heatsink and cooling fan provide the best heat dissipation , help to extend the using life of Raspberry Pi .
● USB , Ethernet port , a..
$21.99
Ex Tax:$21.99
>
Features:- High-quality aluminum box,Customize for Raspberry Pi 3/Raspberry Pi 2/ Raspberry Pi B+
- High dimensional accuracy, surface anodic oxidation process. Durable, never fade
- Good ventilation,easy carrying Simply Clicks Together Enclosure,Plug and Play Cooling Fan
- Access to all Ras..
$16.99
Ex Tax:$16.99
>
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, ge..
$44.99
Ex Tax:$44.99