Menu
Your Cart

600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface

600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
600x448 5.83inch E-Ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI Interface
$75.99
Ex Tax: $75.99
  • Stock: In Stock
  • Model: EB0048434
  • SKU: EB0048434
>

Overview:

This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

 More infor for you to know more: https://www.waveshare.com/wiki/5.83inch_e-Paper_HAT_(B)#C_.28Used_for_Jetson_Nano.E3.80.81Raspberry_Pi.E3.80.81STM32.29

Features:


No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating voltage: 3.3V~5V
Interface: SPI
Outline dimension: 125.40mm × 99.50mm
Display size: 118.80mm × 88.26mm
Dot pitch: 0.198 × 0.197
Resolution: 600 × 448
Display color: red, black, white
Grey level: 2
Full refresh time: 14s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

Interface
SYMBOL    DESCRIPTION
VCC    3.3V~5V
GND    Ground
DIN    SPI MOSI pin
CLK    SPI SCK pin
CS    SPI chip selection, low active
DC    Data/Command selection (high for data, low for command)
RST    External reset, low active
BUSY    Busy status output, low active

Explanation:

1. Refresh time: This refers to the global refresh time, that is, the time it takes to refresh each frame of the image; if the ink screen itself supports partial refresh, the partial refresh time is about 0.3 seconds

2. Pi interface: based on the standard interface design, suitable for Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +


Package Included: (raspberry pi board not included)

5.83inch e-Paper (B) x1
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1


600x448-583inch-E-Ink-Display-e-Paper-HATB-for-Raspberry-Pi-RedBlackWhite-Color-SPI-Interface-1673532

600x448-583inch-E-Ink-Display-e-Paper-HATB-for-Raspberry-Pi-RedBlackWhite-Color-SPI-Interface-1673532

600x448-583inch-E-Ink-Display-e-Paper-HATB-for-Raspberry-Pi-RedBlackWhite-Color-SPI-Interface-1673532


Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!