Power Supply Module
>
Description:
2-Cell(2S) 8.4V Version:
Input voltage: DC 10-23V(Recommend DC 12V/14.8V/15V/18V)
Charging voltage: 8.4V
Charging current: 0.5A
Led indicator:
Bright: Charging Off: full blinking: almost full; If the charging current is too large (or the battery capacity is small), it ..
$19.99
Ex Tax:$19.99
Description: 3-Cell(3S) 12.6V Version: Input voltage: DC 14.8-23V(Recommend DC 14.8V/15V/18V) Charging voltage: 12.6V Charging current: 0.5A Led indicator: Bright: Charging Off: full blinking: almost full; If the charging current is too large (or the battery capacity is small), it will quickly en..
$19.99
Ex Tax:$19.99
Feature: Input voltage 0.9-5V; output voltage 5V Maximum output current: 480Ma Starting voltage 0.8V, output current 7MA Input 1-1.5V, output 5V 40-100MA Input 1.5-2V, output 5V 100-150MA Input 2-3V, output 5V 150-380MA Input more than 3V, output 380-480MA Operating frequency: 150KHZ Typical conve..
$10.99
Ex Tax:$10.99
Feature: Input voltage 0.8-3.3V output voltage 3.3VMaximum output current: 500 mAStarting voltage 0.8V, output current 10MAInput 1-1.5V, output 3.3V 50-110MAInput 1.5-2V, output 3.3V 110-160MAInput 2-3V, output 3.3V 160-400MAInput more than 3 v, and have spent 5V output of 400-400 MAOperating frequ..
$10.99
Ex Tax:$10.99
12V 2-in-1 charge and discharge (boost) module: Charging voltage: DC 4.6V-8V (recommended DC 5V) Charging current: 0-1000mA Full charge voltage: 4.2V + -2%. LED indicator: "OK" LED full charge or battery fault status indicator; "CR" LED is the charge status indicator Discharge current: 0-2000mA; ..
$24.99
Ex Tax:$24.99
Parameter: Size: 29*24*18mm(length*width*height, irregular size, most prominent part of measurement) Use: Science experiments, electronic instruments, negative ion generators, scientific productions, etc. Note: 1. The high-voltage winding of the transformer is in the inner layer. It is wou..
$10.99
Ex Tax:$10.99
Feature: Input voltage: DC 8-32V, output voltage: DC 2-30V adjustable Constant current voltage: adjustable from 0.2-2.5A Maximum output current: 2.5A (maximum power can not exceed 15W) Quiescent current: 2.1mA Protection: Over temperature protection Low voltage protection Short circuit protection Wo..
$24.99
Ex Tax:$24.99
Description: 1-Cell(1S) 4.2V Version: Input voltage: DC 4.5V-23V(Recommend DC 5V/6V/9V/12V/15V) Charging voltage: 4.2V Charging current: 1A Led indicator: Bright: Charging Off: full blinking: almost full; If the charging current is too large (or the battery capacity is small), it will quickly ente..
$19.99
Ex Tax:$19.99
Description: 2-Cell(2S) 8.4V Version: Input voltage: DC 10-23V(Recommend DC 12V/14.8V/15V/18V) Charging voltage: 8.4V Charging current: 1A Led indicator: Bright: Charging Off: full blinking: almost full; If the charging current is too large (or the battery capacity is small), it will quickly enter..
$19.99
Ex Tax:$19.99
Description: 3-Cell(3S) 12.6V Version: Input voltage: DC 14.8-23V(Recommend DC 14.8V/15V/18V) Charging voltage: 12.6V Charging current: 1A Led indicator: Bright: Charging Off: full blinking: almost full; If the charging current is too large (or the battery capacity is small), it will quickly ente..
$19.99
Ex Tax:$19.99
Descriptions: - 3.7V 4.2V Li-ion Li-Po Lithium Battery Charger Module with automatic current limiting function - Power supply voltage DC 4.4-6V(DC 5V),Charging output voltage DC 4.2V; - The maximum charge current / output current is 1A, but you can change the current by changing the value ..
$13.99
Ex Tax:$13.99
Feature: Size: 20 x 20 x 5mm/0.78 x 0.78 x 0.19(inch) (approx)Module properties: non-isolated boost Rectification: non-synchronous rectification Input voltage: 2.5V-6V Output voltage: 4V-12V (adjustable) Output current: 1000mA (Max) Conversion efficiency: 92% (the highest)Switching frequency: 1MHzO..
$5.80
Ex Tax:$5.80