bluetooth Vibration Gamepad Gyroscope Somatosensory Game Controller for Nintendo Switch Game Console Left Right Game Pads for NS

Features:

This handle is compatible with the Switch host and only supports wireless connection

This handle can be used as a whole handle or as two independent handles

The one-key connection mode is easy to operate

Wireless connection, strong anti-interference ability, stable connection signal

Built-in 300 mAh polymer lithium battery, it can last about 4 hours after being fully charged

This handle has a built-in gyroscope that supports motion sensing

Each of the left and right handles has a built-in motor to support the vibration function

You can connect multiple wireless controllers to the host to play multiplayer games at the same time

Ergonomic design and lightweight handle structure, even if the player plays for several hours without fatigue

This handle can be connected to a computer via a USB cable and upgraded with updated software.

Button Introduction:

HOME key*1: Turn on the handle or execute commands from the host

Direction keys*1 group: up, down, left, right. Eight-direction operation; when the left handle is used as an independent handle, the arrow keys are used as function control keys

Function control keys *4: A, B, Y, X. Perfect button design, finger touch operation is more sensitive and quick

Left and right joysticks*2: the ultra-thin 3D joystick of novel design, 360-degree precision operation.

Function keys *4: L1, R1, L2, R2. The new key switch design, quick response

Screenshot key*1: When the left and right handles are used as a whole handle, press this key in the game to take a screenshot and save the current screen; when the left handle is used as an independent handle, the screenshot key is used as the HOME button

Reset button *2: Press the switch button in the reset hole, close the handle, and disconnect the handle from the host

Unlock keys*2: simultaneously press and hold the unlock keys on the back of the left and right handles to take out the host

Connected Operation:

Connect the handle to the host for the first time:

Turn on the Switch host, in the host main menu interface, touch and click "Controllers" → "Change Grip/Order" with your finger to enter the host pairing mode interface "Press L + R on the controller", ignore "L + R", and then follow Follow the steps below:

(Remarks: Please connect each handle of the device with the code in the host pairing mode interface.)

A. How to connect a pair of handles (left handle + right handle) as a whole handle:

Step 1: On the left handle, press and hold the screenshot button for 4 seconds to turn on the left handle. The four LED lights will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) of the LEDs is constantly When it is on, it indicates that the left handle is successfully paired.

Step 2: On the right handle, press, and hold the HOME button for 4 seconds to turn on the right handle. The four LED lights will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) LEDs are always When it is on, it indicates that the right handle is successfully paired.

Step 3: After the left and right handles are successfully paired with the host, press the L1 and R1 buttons at the same time. At this time, the corresponding LED lights on the left and right handles are on, indicating that the connection is successful. An overall handle (left handle + right Handle) is ready to use.

Step 4: Press B to return to the main page of the host.

B. The connection method of the left handle as an independent handle:

Step 1: On the left handle, press and hold the screenshot button for 4 seconds to turn on the handle. The four LED lights will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) of the LEDs is always on , It means the pairing is successful.

Step 2: Press the SL and SR buttons on the side of the left handle at the same time, the corresponding LED light on the side of the left handle will be on, indicating that the connection is successful, and the left handle becomes an independent handle and can be used.

Step 3: Press the left button of the arrow key to return to the main page of the host.

C. The connection method of the right handle as an independent handle:

Step 1: On the right handle, press, and hold the HOME button for 4 seconds to turn on the handle. The four LEDs will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) of the LEDs is always on, It means the pairing is successful.

Step 2: Press the SL and SR buttons on the side of the right handle at the same time. At this time, the corresponding LED light on the side of the right handle is on, indicating that the connection is successful. The right handle becomes an independent handle and can be used.

Step 3: Press A to return to the main page of the host.

Package Included:

1 x Left Gamepad

1 x Right Gamepad