bluetooth Gamepad for Nintendo Switch Game Console Left Right Game Controller Joystick Gamepad Wireless Controller for NS

Features:

This gamepad is compatible with the Switch host and only supports wireless connection

This gamepad can be used as a whole handle or as two independent handles

The one-key connection mode is easy to operate

Wireless connection, strong anti-interference ability, stable connection signal

Built-in 300 mAh polymer lithium battery, it can last about 4 hours after being fully charged

This handle has a built-in gyroscope that supports motion sensing

Each of the left and right handles has a built-in motor to support the vibration function

You can connect multiple wireless controllers to the host to play multiplayer games at the same time

Ergonomic design and lightweight handle structure, even if the player plays for several hours without fatigue

This handle can be connected to a computer via a USB cable and upgraded with updated software

Button Introduction:

HOME key*1: Turn on the handle or execute commands from the host.

Direction keys*1 group: up, down, left, right. Eight-direction operation; when the left handle is used as an independent handle, the arrow keys are used as function control keys.

Function control keys *4: A, B, Y, X. Perfect button design, finger touch operation is more sensitive and quick.

Left and right joysticks*2: the ultra-thin 3D joystick of novel design, 360-degree precision operation.

Function keys *4: L1, R1, L2, R2. The new key switch design, quick response.

Screenshot key*1: When the left and right handles are used as a whole handle, press this key in the game to take a screenshot and save the current screen; when the left handle is used as an independent handle, the screenshot key is used as the HOME button.

Reset button *2: Press the switch button in the reset hole, close the handle, and disconnect the handle from the host.

Unlock keys*2: simultaneously press and hold the unlock keys on the back of the left and right handles to take out the host.

Online guidance:

Connect the handle to the host for the first time:

Turn on the Switch host, in the host main menu interface, touch and click "Controllers" → "Change Grip/Order" with your finger to enter the host pairing mode interface "Press L + R on the controller", ignore "L + R", and then follow Follow the steps below:

(Remarks: Please connect each handle of the device with the code in the host pairing mode interface.)

How to connect a pair of handles (left handle + right handle) as a whole handle:

Step 1: On the left handle, press and hold the screenshot button for 4 seconds to turn on the left handle. The four LED lights will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) of the LEDs is constantly When it is on, it indicates that the left handle is successfully paired.

Step 2: On the right handle, press, and hold the HOME button for 4 seconds to turn on the right handle. The four LED lights will flash slowly at first. After 4 seconds, the four LEDs will flash quickly and enter the search state. When one (or more) LEDs are always When it is on, it indicates that the right handle is successfully paired.

Step 3: After the left and right handles are successfully paired with the host, press the L1 and R1 buttons at the same time. At this time, the corresponding LED lights on the left and right handles are on, indicating that the connection is successful. An overall handle (left handle + right Handle) is ready to use.

Step 4: Press B to return to the main page of the host.

Package Included:

1 x Left Gamepad

1 x Right Gamepad