PoE HAT IEEE802.3af 5V 2.5A Output Power Over Ethernet Expansion Board + Cooling Fan for Raspberry Pi 3 Model B+(Plus)

Based on 0 reviews. - Write a review

$53.99

Ex Tax: $53.99

Stock: In Stock
Model: EB0050055
SKU: EB0050055

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Overview:

The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 3 Model B+. It allows the Raspberry Pi to be powered via a power-enabled Ethernet network.

[Features]

802.3af PoE

Fully isolated switched-mode power supply

36–56V DC, Class 2 device

5V/2.5A DC output

25mm x 25mm brushless fan for processor cooling

Temperature-controlled fan

[Compliance]

The Raspberry Pi PoE HAT has undergone extensive compliance testing, and meets the following European standards:

Electromagnetic Compatibility Directive (EMC) 2014/30/EU

Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

[GETTING STARTED]

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product:

Raspberry Pi PoE HAT

Mechanical spacers

Other hardware needed:

A Raspberry Pi 3 Model B+

An Ethernet cable

Power-sourcing equipment for a 802.3af Power over Ethernet network

Connecting your PoE HAT to the Raspberry Pi:

Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board

Then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi

Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT:

Take care when separating the HAT from the Pi

Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information:

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

[Safety]

IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

Warnings

This product:

Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use

Should be operated in a well-ventilated environment, and should not be covered

Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items

Instructions for safe use

To avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:

Do not block or obstruct the fan

Do not insert anything into the fan at any time

Do not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operation

Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors

Avoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damage

All other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include, but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry Pi

Packing List:

1 x Raspberry Pi Power over Ethernet Hat

1 x Mini fan (with install screw Pack)

1 x Screw Pack

Note: The raspberry pi board is not included.

PoE-HAT-IEEE8023af-5V-25A-Output-Power-Over-Ethernet-Expansion-Board--Cooling-Fan-for-Raspberry-Pi-3-1417644

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Raspberry Pi