Banana Pi G1 Open Debugger Board Burner Module
- Stock: In Stock
- Model: EB0050181
- SKU: EB0050181
Introduction:
Open Debugger is a set of programming tools in the development of STM series of microcontrollers, TI CC1x, 2x, TI CC3x series SOC, when STC Series MCU can be programmed quickly and easily debug, debugging programmer does not have to do something different series of chips switching plug tedious work.
In addition, it also integrates a USB to serial port, which is a common interface for embedded development.
It is also one of USB2.0 HUB, making it easy to extend to other USB tools.
With it, no longer need to face a bunch of different writer, complicated mess of wiring, USB port deficiencies.
Operating Condition:
Operating voltage: DC 5V
Operating temperature: 0°C to 85°C
The onboard voltage output: 3.3 V
Maximum output current: 2000 mA
Supported operating systems:
Microsoft Windows 2000
Windows XP SP2/SP3 operating system (32-bit versions)
Windows Vista operating system (32 and 64 bit)
Windows 7 operating system (32 and 64 bit)
Windows 8 operating system (32 and 64 bit)
Support Objects:
a)CC Debugger Interface:
Programming and debugging of the following 8051-based TI SoCs:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
Control the same apparatus to SmartRF Studio. In addition, you can also control the following transceiver SmartRF:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
It can also be used to program the PurePath wireless devices:
CC8520, CC8521
CC8530, CC8531
b)SWD Interface:
Programming and debugging mainstream ARM7 9 11, Cortex-A5 A8 A9 M0 M1 M3 M4
Supported MCU manufacturers:
ST, Freecale, Nuvoton, NXP, TI, Cypress, Atmel, Analog, Fujitsu, Toshiba, Energy Micro...
Speeds up the programming and debugging functions 4Mhz: Write Flash Rom, EEPROM, ARF, and support for full speed, stepping, breakpoints
c)JTAG Interface:
JTAG programming and debugging interface for all supported kernel.
d)UART Interface:
STC series microcontroller programming and debugging output port for printing information.
Package included:
1 x Original Banana Pi G1 Open Debugger
| Acronym table | |
| CSn | Chip Select (active low) |
| DC | Debug Clock |
| DD | Debug Data |
| RST | Debug Reset |
| DUT | Device Under Test |
| GND | Ground |
| LED | Light Emitting Diode |
| MISO | Master In Slave Out |
| MOSI | Master Out Slave In |
| RF | Radio Frequency |
| SCLK | Serial Clock |
| SoC | System-on-Chip |
| SPI | Serial Peripheral Interface |
| USB | Universal Serial Bus |
| Target | Positive voltage on target |
| CLK | SWD Clock |
| DIO | SWD DATA Input/Output |
| TMS | JTAG Test Mode Select |
| TCK | JTAG Test Clock Input |
| TDO | JTAG Test Data Output |
| TDI | JTAG Test Data Input |
| SRST | JTAG Test Reset Input, Active Low |
| RXD | USB Serial Input |
| TXD | USB Serial Output |
,
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
