NS191 Switch bluetooth Handle Mini Gamepad Dual Burst Gaming Joystick with Screen Shot Vibration

Based on 0 reviews. - Write a review

$49.99

Ex Tax: $49.99

Stock: In Stock
Model: EB0020491
SKU: EB0020491

Available Options

Color

Green

Blue red

Yellow

Grey

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

For the first connection and pairing, please follow the steps below:

1. Turn on the Switch host

2. Install the handle on the Switch host and use the slide on the side of the host to slide the handle from top to bottom until you hear a slight click

3. The handle starts to automatically register and pair. After the pairing is successful, it can be plugged in and used on the host or removed

Connect and use via Bluetooth:

After the controller is installed on the host, the pairing cannot be registered, please refer to the following methods to check the pairing problem:

1. Make sure your host has been upgraded to the latest system

2.Press the pairing button to close the handle, reset the connection of the handle, and then plug the handle into the host

3. Insert the handle into the host, make sure the direction of insertion is correct, it slides to the end, and a slight click sound is heard

4. Unplug the handle from the host, try to insert it again, and rule out that it cannot be paired because there is no good contact

5. If the handle cannot be awakened, please charge your handle before trying to pair

Note:

1. The switch host must be in the on state, if the host is in the dormant or off state, the handle cannot be paired

2. When the handle cannot be awakened or the LED indicator continues to flash slowly, please charge your handle before using it

How to pair (connect back) the controller to the switch host again:

After the handle is paired for the first time, the handle can be connected to the host again in the following two ways

Method 1 Bluetooth connection and pairing

1. Turn on the Switch host

2. Press any function key (except the joystick) for 2 seconds to wake up the handle, and then the handle will automatically and

The host connects back to the pair via Bluetooth, and the back-to-back pairing can be completed in about 4 seconds

3. Once the pairing is successful, the corresponding LED indicator of the handle will be on

Method 2 Wired connection pairing:

1. Turn on the Switch host

2, Attach the handle to the host through the slide on the side of the host

3. After that, the handle will automatically pair with the host through a wired connection, which can be completed in about 4 seconds

Connect back to match

Pairing question answer:

When the handle is inserted into the host, it cannot be paired, please refer to the following method to check the paired handle or method

Method 1: Delete the pairing information of the Switch host

1. On the main interface, select [Settings], then click [Handle and Sensor], and select [Disconnect the handle]

2. Long press the X button of the handle to disconnect the host from all handles and release the matching

3. Pair all the handles that need to be used again

Method 2: Press the pairing button of the handle, reset the handle connection, and pair again

Remove the handle from the host, press the pairing button of the handle, reset the connection of the handle, and pair the handle to the host again

Method 3: Ensure that the handle has been slid into the slideway of the host in the correct way, and slide the handle to the end

Method 4: Charge your handle, because the battery of the handle must be in a low battery during transportation

When you get the handle, the handle may be in a low power state and cannot be turned on

Method 5: Make sure the host is the latest system

Method 6: Try to remove the handle from the host and connect again

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Gamepad