Menu
Your Cart

Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board

Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Out Of Stock
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
Without PoE ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$43.99
Ex Tax: $43.99
  • Stock: Out Of Stock
  • Model: EB0041988
  • SKU: EB0041988
  • Voltage: DC5V
    Precise details>>
    Product Overview:

    If you're looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
    Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.

    Leonardo ETH(V2) features two devices on one board: Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).

    W5500 Ethernet:

    WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.

    Ports and buses:

    Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 - 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.

    SD-card:

    The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.

    HID functions:

    Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an Arduin IDE, open a sketchand start the compilation/upload.

    Programming in Arduin IDE:

    Leonardo ETH(V2) can be programmed via an IDE. Select Leonardo or Leonardo ETH in the В«BoardsВ» menu, and use the Ethernet2 / Ethernet3 library.

    Power supply:

    Leonardo ETH(V2) can be powered via:

    USB port (5V, 500mA);
    DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
    Through an Ethernet cable using PoE (Power over Ethernet) - requires a PoE-enabled switch or a PoE injector.

    Note: 
    With PoE version: Contact Us, without PoE version:  this item
    The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
    The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesn’t meet the device requirements, it just won’t power up.
    The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
    Make sure to select the correct board option with a relevant PoE module.

    Specifications:

    Leonardo ETH V2
    Input Voltage (VIN/DC jack)7~24V
    Power IN (USB)5V-limit 500mA
    Power IN (PoE)Optional module, 48V(Input), 9V(Output)
    Digital I/O23
    PWM Output7
    Analog I/O12
    Reserved PinsD4 is used for SD card select;
    D9 is used for SD card detect;
    D10 is used for W5500
    D14,D15,D16 are used for SPI.
    *Optional: D8 is used for W5500 interrupting, D11 is used for W5500 initialization
    USB socketMicro-USB
    Ethernet socketRJ45
    PCB Size53.3×68.6mm
    Card ReaderMicro SD card, with logiclevel convertor
    Weight41g
    Leonardo MCU
    MicrocontrollerATmega32u4(AVR)
    Operating Voltage5V
    Flash memory32KB of which 4KB used by bootloader
    SRAM2KB
    Clock Speed16MHz
    EEPROM1KB
    Ethernet MCU
    MicrocontrollerWiznet W5500
    PHY compliance10BaseT/100BaseTX Ethernet. Full and half duplex
    Operating Voltage3.3V, 5V I/O signal tolerance
    MemoryInternal 32Kbytes Memory for Tx/Rx Buffers
    TCP/IP ProtocolsTCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
    PHY Clock Speed25MHz

     Documents:

    Tutorial: Click here to open: http://myosuploads3.banggood.com/products/20200408/20200408032104Tutorial.docx 

    Package includes:

    1 x Leonardo module

    Robotdynreg-Without-PoE-Leonardo-ETH-ATmega32U4-Ethernet-W5500-V2-Development-Board-1660664Robotdynreg-Without-PoE-Leonardo-ETH-ATmega32U4-Ethernet-W5500-V2-Development-Board-1660664Robotdynreg-Without-PoE-Leonardo-ETH-ATmega32U4-Ethernet-W5500-V2-Development-Board-1660664Robotdynreg-Without-PoE-Leonardo-ETH-ATmega32U4-Ethernet-W5500-V2-Development-Board-1660664


    Write a review

    Note: HTML is not translated!
    Bad Good

    Shipping Time


    After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

    The timeline of the whole shipping process is shown below:

    img

    The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

    Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


    Shipping Rates


    You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


    Shipping MethodShipping RatesShipping Times
    Flat Shipping (Promotion)
    $10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

    Standard Express(0.5KG starting price listed)

    Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

    Priority Express (0.5KG starting price listed)

    Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

    In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

    If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!