Module Board
>
Description:
On-board TP4056 Lithium charge management chip
On-board Mini USB head, can direct connect to PC USB charging
This board can power by IN+ and IN- too
Reserved TEMP pin connector, can as Lithium temperature detection
Input voltage: 4V-8V
output max charging current: 1000mA
The D1..
$8.99
Ex Tax:$8.99
Dimensional drawing: Click here to openFeature: The USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Ba..
$17.99
Ex Tax:$17.99
>
Specification:
Product name: Lithium Battery Charging Board
Input voltage: 5V
Maximum charging current: 1000 mA
Charge cut-off voltage: 4.2 V + / - 1%
Battery overcharge protection voltage: 2.5 V
Battery over-current protection current: 3 A
Input i..
$9.99
Ex Tax:$9.99
>
Parameter:
Size: 25*17*5mm (length*width*height)
Input voltage: DC 5-18V(actual 5-12V is appropriate)
Charging status: full and no-load blue light, red during charging
The voltage setting must be operated in the power-off state, and the switch must be disconnected before sw..
$17.99
Ex Tax:$17.99
Content-Length: 1850
>
Features:
Power amplifier chip: TPA3110
Operating voltage: DC 8 ~ 26V (power input with polarity protection)
Recommended power supply: DC 12V current 2A
Output power: 2x15W
Recommended speaker impedance: 4 ~ 10 ohms
With mute interface:..
$26.99
Ex Tax:$26.99
>
Overview:This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooli..
$31.99
Ex Tax:$31.99
10pcs Transparent Shell Acrylic Case For 128X64 0.96 Inch OLED LCD LED Display Module Holder Bracket
>
Feature:
Material: Acrylic sheet
Color: Transparent (Please tear the protective film before use)
Uses: For 0.96 Inch OLED LCD LED display module bracket
Note: The display module does not includes.Package includes:
10 x Acrylic Bracket Kit..
$11.99
Ex Tax:$11.99
Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate..
$6.76
Ex Tax:$6.76
Features: - FET module, input and output totally isolated from each other.- Input signal voltage: 3V~20V; Input current: about 5mA.- Output voltage: 5V~36V(Current: within 5A, Max. current is 20A. -When current is over 5A, please add heat sink).- Signal trigger: digital high/low signal, can be conn..
$21.99
Ex Tax:$21.99
Principle: Turbidity sensor TS-300B measures the turbidity (counter of suspended matter) in the wash water. Based on the optical principle, the sensor uses the light-emitting diode and phototransistor to receive the specific wavelength to measure the opacity or other substances of dirty water. conc..
$39.99
Ex Tax:$39.99
>
Features:
(1) The module is fully considered mine design, long-distance transmission signal 485 in the wild, the module "Connected to the ground" terminal is connected to the earth, can play a very good anti-jamming and anti- effect, more secure; it can not connect with the ground ..
$14.99
Ex Tax:$14.99
>
Features:
1. Compatible with 3.3V and 5.0V power supply.
2. Compatible with 3.3V and 5.0V signal.
3. Absolute using imported chips, industrial design, anti-interference ability, while using more effective mine design can be used in the industrial field and harsh field environmen..
$14.99
Ex Tax:$14.99