Module Board
Package Included:10 x LilyPad TEMT6000 Light Sensor Module..
$13.99
Ex Tax:$13.99
>
Description:
Sure, your flashing, chip-tune playing t-shirt is really cool at the party... but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you've even sewn a LilyPad slide switch in-line. Wouldn't it be nice if there was just a switchont..
$11.99
Ex Tax:$11.99
Feature:The DC-DC Step-down Adjustable Power Supply Module with 3digit LED Display is based on monolithic integrated circuit LM2596, ideally suited for easy and convenient design of a step−down switching regulator (buck converter). It is capable of driving a 3.0A load with excellent line and load re..
$52.99
Ex Tax:$52.99
Specification: 1. With the voltmeter shows voltage meter error ± 0.1V, the range 0-40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage of 4V and above) 2. Touch the key to switch measuring input or output voltage, and has a light show which is being measured vo..
$26.99
Ex Tax:$26.99
Description: 1, Input voltage: 3.2-35VAdjustment method: the first to connect the power supply (3.2-35V) and then use a multimeter to monitor the output voltageand adjust the potentiometer (generally rise the voltage in Clockwise, reverse to buck)2, Output voltage: 1.25-30V continuously adjustable (..
$12.24
Ex Tax:$12.24
Feature: Output Current: 1.5A (minimum), 2.2A (typ)Input and output voltage difference (VI-VO): 40Vdc (max)Adjustable output voltage range: 1.2 ~ 37VOperating temperature: -55 to +150Output Current: 1.5AInput voltage: 4.2 ~ 40 VCharacteristics Frequency: 100 (MHz)Module size: 35.6 (mm) x16.8 (mm)In..
$10.99
Ex Tax:$10.99
Content-Length: 2197
>
Features:
LM358 is the core two-stage operational amplifier, which can amplify DC weak signals, such as DC voltage signals, DC pulse signals, can amplify signals of millivolts or even weaker, and has two potentiometers..
$18.99
Ex Tax:$18.99
>
Feature:
1. On-board LM386 Chip
2. 20 times gain circuit design
3. On-board speaker wiring Block
4. On-board 10K variable resistor, you can adjust the volume of the amplifier
5. On-board power indicator
6. The chip pin was leaded, can be directly input audio signal
7. Operating voltage: 5 ~..
$10.99
Ex Tax:$10.99
Features: 1.The flame sensor is most sensitive to flame,and it will also respond to ordinary light,generally used in fire alarm and other purposes.2.A small panel output interface can be directly connected with the microcontroller IO port.3.The sensor should be kept a certain distance from the flam..
$9.99
Ex Tax:$9.99
>>>Manual: Click here to open..
$8.99
Ex Tax:$8.99
Specifications: The distance between PCB two circular hole (point to point center) is 1.5cm, and the aperture is 0.3cm. Slot type optocoupler slot width : 10mm Main chip: LM393, slot type optocoupler H2010 Working voltage: DC 5V Size: 32mm x11mm x 20mm Characteristic: 1. There is a signal outp..
$9.99
Ex Tax:$9.99
>
Features:
- On-board LM393 voltage comparator chip and tilt sensor probe
- Support 5 V / 3.3 V voltage input
- On-board signal output instructions, output is high effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcom..
$14.99
Ex Tax:$14.99