Module Board
5Pcs DC 5V KY-003 Hall Magnetic Sensor Module For Description:Brand:RenhotecModel: KY-003Magnetic, speed, gap inductionSuitable for DIY projectWorking voltage: DC 5VMaterial: PCBFeature: Small size and high sensitivity. Fast response temperature and good performance. Precision and high reliability..
$9.99
Ex Tax:$9.99
>
Introduction:
1. The power supply: 5V
2. Module size: 52.8mm x 32mm x 18mm
3. According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, and then press the button to disconnect, low level trigger. Power on a..
$11.48
Ex Tax:$11.48
>
Parameter:
Voltage supply: DC 5V-60V
Weight: 34g
Features: buzzer alarm
Functional mode description:
OPE: relay closure time
CLE: relay off time
Time period: PE-1 to PE-5, 5 time periods
"----": function blocking
P-1:
daily OPE relay closed / output ..
$27.99
Ex Tax:$27.99
>
Specification:
Working voltage: 5V.
Standby current: ≤ 1mA.
Working current: ≤90mA.
Standby light: Yes.
Extended time: adjustable 3 seconds to 130 seconds.
Trigger mode: touch.
Board size: 38.5mm x 28.5mm
Package Included:
5 x Touch Delay Light..
$16.99
Ex Tax:$16.99
Description:This Fan system is using for RIDEN® CNC power supply module.Package included:5 x 3cm Fan System5 x cable..
$15.99
Ex Tax:$15.99
Features: - 1203B DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). - The input power range is DC 6V-28V . - Duty Cycle adjustable range : 0%-100%. - Item Size: 1.3*2*0.4 inches Operating Instruction: 1. Connect wires refer to the “wiring d..
$20.99
Ex Tax:$20.99
Features:Working voltage: DC7~110VMeasuring current range: DC0.05A~10A(display mode 0.05A)Voltage measurement range: DC 7~110V (display mode 0.0V~10.00V~110.0V)Refresh time: 300msDisplay mode: 0.28 inch 3-digit LEDProduct size: 46.75×28.82×22.20mmHole size: 45.5×26.0mmProduct weight: 20gDigital dis..
$14.99
Ex Tax:$14.99
>
Features:
Working voltage: DC7~110V
Measuring current range: DC0.05A~10A(display mode 0.05A)
Voltage measurement range: DC 7~110V (display mode 0.0V~10.00V~110.0V)
Refresh time: 300ms
Display mode: 0.28 inch 3-digit LED
Product size: 46.75×28.82×22.20mm
Hole size: 45.5×26.0mm
Product weigh..
$16.99
Ex Tax:$16.99
>
Description:
1. The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0V to 5V pulse. (or 0V to 3.3V pulse if you solder SJ2 closed on the EasyDriver)
2. EasyDriver requires a 7V to 30V supply to power the motor and can power any..
$14.99
Ex Tax:$14.99
Content-Length: 1909
>
Features:1. Power input to increase the rectifier bridge, AC and DC can be used, the input DC is not divided into positive and negative, more convenient for
using.
2. Performance is more stable
3. Using NE5532 op amp chip and ro..
$18.99
Ex Tax:$18.99
Features: The product is easy to install and can be used directly on the motherboard.The four corners have fixed mounting holes to prevent the product from being powered off due to movement and vibration. The diameter of the fixing holes is 3.2mm.Worldwide universal input voltage: AC 85-264V or DC ..
$17.99
Ex Tax:$17.99
Parameter: Input voltage: DC 9V-24V Output voltage: DC 9V-24V Load power: 30W Load current: 3A Standby current: 10mA Standby power consumption: 0.1W Working environment temperature: -20°C-65°C Model: Touch_S (L40W10) Size: 40*10*1.2mm (length*width*height) (The test condition: Vin=12V) Mode desc..
$13.99
Ex Tax:$13.99