Module Board
>
Features: 8 Bits, 8 keys, 8 LEDs, 8 digital tubes, common cathode LED digital tube. With TM1638 Chip, this module gather more than three common peripheral circuits. The advantage is only three IO ports will be occupied when it drives. doesn't need to work for scaning display and key scan..
$13.99
Ex Tax:$13.99
Feature: Special IC touch measure, high sensitivity, stable output 0.5 seconds after power automatically calibration stable (do not touch during this period) Output indicator LED, easy to debug observation Direct type, non-self-locking, press to output low, release to keep high level High sensitivit..
$11.99
Ex Tax:$11.99
Feature: PCB size: 38 x 24 x 1.6mmWokring voltage: 3.3/5VDCCompatible interfaces: 2.54mm 3-pin interface and 4-pin grove interfaceNote: S for voltage digital output port, N for not used pin, V and G for voltage at the common collector and ground respectively. When there is no operation, digital out..
$7.99
Ex Tax:$7.99
>
Dimensional drawing: Click here to openFeature:
The USB Li-Ion Battery Charger is a
complete constant-current/constant-voltage linear charger for
single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The
Charger base on TP4056. The ideally suited for portable applicatio..
$8.99
Ex Tax:$8.99
Voltage: DC5V Precise details>> Precise details: Specification: Product name: Lithium Battery Charging BoardInput voltage: 5VMaximum charging current: 1000 mACharge cut-off voltage: 4.2 V + / - 1%Battery ..
$5.99
Ex Tax:$5.99
>
Feature:
The Micro-USB Li-Ion Battery Charger is a complete constant current/constant-voltage linear charger for single cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.
And the Li-Ion Battery Charger ..
$8.99
Ex Tax:$8.99
>
Parameter:
Size: 25*17*5mm (length*width*height)
Input voltage: DC 5-18V(actual 5-12V is appropriate)
Charging status: full and no-load blue light, red during charging
The voltage setting must be operated in the power-off state, and the switch must be disconnected before sw..
$8.99
Ex Tax:$8.99
>
Features:
Power amplifier chip: TPA3110
Operating voltage: DC 8 ~ 26V (power input with polarity protection)
Recommended power supply: DC 12V current 2A
Output power: 2x15W
Recommended speaker impedance: 4 ~ 10 ohms
With mute interface: MUTE (not available)Package included:
3 x TPA3110 2x15W ..
$13.99
Ex Tax:$13.99
Content-Length: 1759
>
Description:- Audio input: bluetooth receive
- Power supply voltage: 8~26VDC (DC) polarity reverse protection
- Power amplifier chip: 2x30W stereo TPA3118
- Applicable speaker impedance: 4, 6, 8 ohm
- AUX input: 3.5 earphone seat..
$29.99
Ex Tax:$29.99
>
Feature:Apply: Use for HC-SR501 IR Pyroelectric Infrared Motion SensorNote: This HC-SR501 sensor doesn't includes.Package includes:3 x Transparent Acrylic Bracket
,,,,,..
$2.89
Ex Tax:$2.89
>
Feature:
This product is for DSP & PLL Digital Stereo FM Radio Receiver Module 87-108MHz With Serial Control only. (Product ID: EB0042680)
Color: Transparent
Material: AcrylicPackage included:
3 x Transparent Acrylic Sheet Housing Case(Receiver Module not included)..
$11.91
Ex Tax:$11.91
>
Overview:This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling..
$12.99
Ex Tax:$12.99