Module Board
Description: Input Voltage: 3-32VDC Output Voltage: 24-380VAC Response time: ON..
$27.99
Ex Tax:$27.99
3Pcs 8A 24V to 12V Step-down LED Driver Adjustable Power Supply ModuleParameters:1. Module properties: Non-isolated step-down constant current, constant voltage module (CC CV) charging module2. Input voltage: DC 7-32V3. Output voltage: (1) DC 0.8-28V continuously adjustable. (2) Fixed output:Choos..
$13.99
Ex Tax:$13.99
Descriptions: - Operating Voltage : DC 5V(5V Version)- Operating Current : 10-15MA- ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands- Two instruction-control mode : AT command and MODBUS command- Under the AT command ,the maximum delay is 9999 seconds- Under th..
$16.99
Ex Tax:$16.99
Descriptions: - Operating Voltage : DC 6-24V(6-24 Version)- Operating Current : 10-15MA- ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands- Two instruction-control mode : AT command and MODBUS command- Under the AT command ,the maximum delay is 9999 seconds- Und..
$16.99
Ex Tax:$16.99
Descriptions: 8-Cell(8S) Version: Input voltage : DC 4.5V-5.5V(Recommend DC 5V) Charging voltage about : 10.8V-13.6V Charging current about : 190mA-210mA USB power protectionShort circuit protection and zero volt battery activationBattery protectionOperating ambient temperature : -40° ..
$12.99
Ex Tax:$12.99
>
Features:
Using the LED dedicated constant current control chip, basically only occupy the Raspberry Pi SPI interface (3 IO + 2 enable) to control 64 LED lights
- Support SPI interface B/B+ involved in Raspberry Pi
- Driver chip: MAX 7219
- Dot matrix type: 8x8 common n..
$24.99
Ex Tax:$24.99
Specifications: Size: 26.4 x 16.3 x 5mmInput: 4.5V-28VOutput: 5V/3A (Max)Conversion efficiency: 92% (Max)Switching frequency: 1.4MHZ (Max) Typical 1MHZWorking temperature: -40°C-+85°CLoad capacity: maximum output 3A, 1.5A long runScope of application: USB5V powered devices such as mobile power, mob..
$4.59
Ex Tax:$4.59
>
Can be used to program MCU types:
STC microcontroller
STM32 microcontroller
NXP microcontroller
Renesas Microcontroller
NEC microcontroller
Feature:
Communication chip: MAX3232
Working voltage: 3.3V-5.5V
Interface: TX RX GND VCC. Package includes: 3 x Converter board..
$7.99
Ex Tax:$7.99
Content-Length: 1980
>
Feature:
1. It is suitable for driving stepper motors of 8V~35V 2A or less
2. Only simple step and direction control interface
3. Five different stepping modes: full, half, 1/4, 1/8 and 1/16
4. The adjustable potentiometer ca..
$6.99
Ex Tax:$6.99
Feature: Name: AM2302B temperature and humidity module Power supply voltage vin: dc3.3-5.5v Output signal: single bus digital signal Display resolution: 0.1°C or 0.1%RH Temperature detection range: -40~80°C Temperature detection accuracy: +-0.5°C Humidity detection range: 0-99.9%RH Humidity detectio..
$15.24
Ex Tax:$15.24
Features: 1. Good anti-interference performance and high reliability. 2. Low operating temperature and long service life. 3. Wide input voltage range, (100-240V) in line with global usage standards. 4. Good insulation performance and high electric strength. 5. Full load high temperature burning ma..
$18.99
Ex Tax:$18.99
>>>Manual: Click here to open..
$8.99
Ex Tax:$8.99