Module Board
>
Specifications:
Voltage: 24V
Quiescent current 2V, 0.5mA
Response time: 50mS
Features:
- the control area and the load area and the contact are in accordance with the creepage distance requirement;
- With relay action indication, the suction is bright, and the..
$22.99
Ex Tax:$22.99
>
Specifications:
Voltage: 5V
Quiescent current 2V, 0.5mA
Response time: 50mS
Features:
- the control area and the load area and the contact are in accordance with the creepage distance requirement;
- With relay action indication, the suction is bright, and the ..
$22.99
Ex Tax:$22.99
>>>Manual: Click here to open..
$45.99
Ex Tax:$45.99
Applications: The TLV3501 is a single-channel high-speed push-pull output comparator with a delay time of 4.5ns and a supply voltage: + 2.7V to + 5.5V. With an input common-mode beyond the swing input, it is for low-voltage applications. Rail-to-rail output can directly drive CMOS or TTL logic. Th..
$125.99
Ex Tax:$125.99
>
Introduction:
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
Features:
Digital Tube: 4-digit com..
$29.99
Ex Tax:$29.99
Feature: PCB size: 38 x 24 x 1.6mmWokring voltage: 3.3/5VDCCompatible interfaces: 2.54mm 3-pin interface and 4-pin grove interfaceNote: S for voltage digital output port, N for not used pin, V and G for voltage at the common collector and ground respectively. When there is no operation, digital out..
$27.99
Ex Tax:$27.99
Dimensional drawing: Click here to openFeature: The USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Ba..
$29.99
Ex Tax:$29.99
Voltage: DC5V Precise details>> Precise details: Specification: Product name: Lithium Battery Charging BoardInput voltage: 5VMaximum charging current: 1000 mACharge cut-off voltage: 4.2 V + / - 1%Battery ..
$11.99
Ex Tax:$11.99
>
Overview:This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling..
$58.99
Ex Tax:$58.99
Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate..
$12.99
Ex Tax:$12.99
Features: - FET module, input and output totally isolated from each other.- Input signal voltage: 3V~20V; Input current: about 5mA.- Output voltage: 5V~36V(Current: within 5A, Max. current is 20A. -When current is over 5A, please add heat sink).- Signal trigger: digital high/low signal, can be conn..
$41.99
Ex Tax:$41.99
>
Features:
(1) The module is fully considered mine design, long-distance transmission signal 485 in the wild, the module "Connected to the ground" terminal is connected to the earth, can play a very good anti-jamming and anti- effect, more secure; it can not connect with the ground wh..
$21.99
Ex Tax:$21.99