Menu
Your Cart

5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board

5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
5MP Camera Module Manual IR-CUT 72° Focal Adjustable Length 5 Megapixels Night Vision NoIR Camera Board
$21.99
Ex Tax: $21.99
  • Stock: In Stock
  • Model: EB0049093
  • SKU: EB0049093
>
Introduction :

The Raspberry Pi IR-CUT Camera is the day and night camera.You can get the best imaging whatever it is in the daytime or at night.It's a built-in IR-CUT camera, can be used during the day and night. When the camera at daytime will switch to day mode, the camera image is a normal color image, when the camera at night will switch to night mode , the camera can normally identify the infrared fill light of the light, which can be set through the software switch, to solve the other night vision camera during the day to take pictures of the image color is not normal.

The differece of automatic or non-automatic switch camera 

1. The automatic switch camera will automatically turn to day mode ( non-night vision ) at daytime or the light enough environment , and it will turn to night vision mode at dark environment .
2. The non-automatic switch camera is the day mode acquiescently . You can switch to night vision mode by this way. 

Editing the config.txt file: 

1. Executive command "sudo nano /boot/config.txt"
2. Add"disable_camera_led=1"
3. Press"Ctrl+O" ( on the keyboard ) , and press "Enter" to save this configuration , then press "Ctrl + X " to exist .
4 . Restart the raspberry pi and it will turn to day mode.
5. Remove the "sudo nano /boot/config.txt" and save configuration ( as the 3 ) , restart the raspberry pi , it will be back to day mode
 
Specifications :

1. 5 megapixel OV5647 sensor
2. CCD size: 1 / 4inch
3. Aperture (F): 1.8
4. Focal Length: 3.6mm adjustable
5. Field of View: 72 degree
6. Sensor best resolution: 1080p
7. 4 screw holes to fix the IR lights or holder:
   1). Used for attachment 
   2). Provides 3.3V power output
 
Features:

 - IR-CUT : it can fix the chromatic aberration problem when use in day, and has better image.
-  Night vison : It support night vison , but need to install the 2 IR fill on it .
- Support all version of Raspberry Pi , include Raspberry Pi 3 Model B+/B , Raspberry Pi Zero .

Tip:

Hardware connection:
1. Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before using the lens
3. bare boards, pay attention to ESD damage, guard against static electricity!

Package Included:

1 x Manual  IR-Cut Camera
2 x IR Lights
1 x 15 cm FFC
1 set x Screws and Nuts


5MP-Camera-Module-Manual-IR-CUT-72deg-Focal-Adjustable-Length-5-Megapixels-Night-Vision-NoIR-Camera--1713573


Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!