K-5203 80g Heatsink CPU Thermal Conductive Silicone Grease Paste Glue Adhesive LED Light Silicon Rubber Gel

Based on 0 reviews. - Write a review

$4.66

Ex Tax: $4.66

Stock: In Stock
Model: EB002837
SKU: EB002837

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Features:

This product is a neutral through reinforced silicone elastomer gel, both bonding effect, and good thermal conductivity (heat), thermal effect is excellent, with good resistance to high temperature curing adhesive Changes performance, long-term use will not fall off, no contact with the gap, the cooling effect is not reduced.

Uses:

The main application is to replace the thermal grease (paste) for the CPU and radiator, thyristor Intelligent control module and radiator, high-power electrical modules and heat sinks between the filling bonding.

With this glue, you can remove the traditional way of connecting with cards and screws, resulting in a more reliable filling of heat, simpler processes, and more economical costs.

Before Curing:

Color: White

Viscosity (CP): Thixotropic paste

Density (g/cm3): 2.0~2.5

Table dry Time (25℃,min): ≤30

After Curing:

Tensile strength (MPa): ≥2.5

Elongation at break (%): ≥100

Shear Strength (MPa): ≥1.5

Hardness (Shore A): 50~65

Operating temperature range (℃): -60~280

Dielectric strength (kv/mm): ≥18

Dielectric constant (@60hz): 2.8

Volume resistance (ω.cm): 1x1015

Thermal conductivity (w/(M.K)): 1.2

How to use:

1. Will be glued or coated surface finishing clean, remove rust, dust and oil and so on.

2. screw open pipe cap, the glue squeeze to have cleaned the surface, so that the distribution will be glued to the surface of the closure can be fixed. 3, will be glued or sealed good parts into the air, so that its natural curing. The curing process is a process of solidification from the surface to the interior, in less than 24 hours (room temperature and 55% relative humidity) will solidify the depth of 2-4mm, if the position is deeper, especially in the location of the air is not easy to contact, the full curing time will be prolonged, if the temperature is lower, curing time will be extended.

3. It is recommended that the user wait long enough to ensure that the bonding is not affected by the firmness and integrity of the adhesive before packaging the parts for further processing or to be bonded.

Note: After the operation is completed, unused glue should immediately tighten cap, sealed to save. When used again, if the seal has a little crust, it can be removed, do not affect the normal use.

Package Included:

1 x Kafuter K-5203 80g Heatsink CPU Thermal Conductive Silicone Glue

Detail Pictures:

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Kafuter K-5203 80g Silicone Grease