JK11-5V 100S/15min/30min Delay Adjustable Infinite Loop Single-time Multi-function Relay Module Delay Circuit Module

Based on 0 reviews. - Write a review

$6.99

Ex Tax: $6.99

Stock: In Stock
Model: EB0047020
SKU: EB0047020

Available Options

Item Type

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

>>>Manual: Click here to open<<<

Specifications:

Voltage: 5V DC

Quiescent current: 8mA

Operating current: 95mA

Trigger: passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)

Minimum on-off time: 0.2 seconds

Load capacity: 10A

Output form: normally open + normally closed

Size: 70*20*19mm

Features:

- Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;

- Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;

- The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;

- The time range is divided into 0-100 seconds, 0-15 minutes, and 0-30 minutes.

Basic working principle:

Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.

In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds... infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.

Instructions:

- Power access:

The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.

- Trigger line access:

The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.

- Normal speed and quick mode settings:

The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.

- Loop mode and single mode settings:

The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.

Cycle mode: After starting, the relay is on-off-on-off-disconnect..., and it is cycled according to the set duration;

Single trigger: After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)

Precautions:

1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.

2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.

3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
4.Borad Number: (marker adjustable delay time)

1=15min

2=100S

3=30min

Package Included:

1 x JK11-5V 100S/15min/30min Delay Adjustable Multi-function Relay Module

JK11-5V-100S15min30min-Delay-Adjustable-Infinite-Loop-Single-time-Multi-function-Relay-Module-Delay--1592696

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Relay