JC-303 bluetooth 5.0 Receiving DAC Decoder Audio bluetooth Module Audio Decoding Board
JC-303 bluetooth 5.0 Receiving DAC Decoder Audio bluetooth Module Audio Decoding Board
$20.99
Ex Tax: $20.99
- Stock: In Stock
- Model: EB0041406
- SKU: EB0041406
- Voltage: 12V
Precise details>>
Precise details:
Overview:
This module is suitable for retrofitting audio equipment such as amplifiers, amplifier boards DY, amplifier preamps and so on.
Transform traditional wired transmission into wireless Bluetooth transmission, the module uses Qualcom 5.0 high-fidelity
The Bluetooth chip and Bluetooth 5.0 high version ensure high data transmission so that the audio data is transmitted losslessly to the analog power amplifier. To achieve wireless HF quality. The module supports 16bit / 48khz non-destructive reception, and the sound quality level reaches CD level. Is a truly lossless Bluetooth receiver module. This module receives Bluetooth, and the pcm5102a decoder core outputs standard single-ended analog audio signals. The audio signal can be directly added to the pre-stage or post-stage analog power amplifier without adding a DAC decoder. In order to facilitate the modification of DY friends, the module has a AUX input for external linear audio. The AUX and Bluetooth are switched by the original NEC high-precision relay. The AUX input is directly switched by the relay without any chip processing. Ensure the lossless output of AUX audio to the amplifier.
Specifications:
1. DC power input interface, GND is the negative pole of the power supply, +12 is the positive pole of the power supply. Wide voltage: 6-36V
2. AUX audio interface, LINE_INR right channel input, GND common ground line LINE_INL left channel input
3. Audio output interface, ROUT right channel output, GND common ground line OUT left channel output
4. Audio switching relay, imported from NEC, guarantees sound quality transmission and working life.
5. Bluetooth antenna buckle interface, used to install an external 2.4g antenna to enhance Bluetooth signal reception, open and unobstructed
6. Up to 20 meters or more, add an external antenna to support through-wall reception. If the module is installed in a metal chassis,
7. Install an external antenna (a 2.4G antenna like a router) to ensure complete signal reception. Outside plastic
8. No external antenna is needed on the side of the case or wooden case.
9. Bluetooth working indicator 1
10. Bluetooth working indicator
Tips:
If after the modification, the Bluetooth amplifier has a slight noise or interference noise when working, add a low-power power supply above 6-36V50MA and separate the Bluetooth module to solve the noise problem. Shared power with equipment is prone to common ground interference and noise floor
Package Included:
1 x bluetooth 5.0 Receiving DAC Decoder
What does the AUX input with relay do?
Answer: This is to help solve the problem of adding a Bluetooth receiver board to an amplifier or active speaker with only one audio input.
For example, a computer active speaker has only one input function, and you cannot plug in an external sound source such as a computer sound card or a CD player when connected to a Bluetooth receiver board. The audio input needs to be unplugged, which is very inconvenient to use. If you have an AUX input, you can use the Bluetooth AUX interface to connect computer sound cards or CD players and other external sound sources. The Bluetooth receiver board output interface is connected to the active speaker input terminal, so you do n't need to unplug the cable. AUX mode. After the Bluetooth connection, it will automatically switch the Bluetooth output, disconnecting the Bluetooth automatically switches to the AUX interface, and the power is also the AUX direct connection function.
Overview:
This module is suitable for retrofitting audio equipment such as amplifiers, amplifier boards DY, amplifier preamps and so on.
Transform traditional wired transmission into wireless Bluetooth transmission, the module uses Qualcom 5.0 high-fidelity
The Bluetooth chip and Bluetooth 5.0 high version ensure high data transmission so that the audio data is transmitted losslessly to the analog power amplifier. To achieve wireless HF quality. The module supports 16bit / 48khz non-destructive reception, and the sound quality level reaches CD level. Is a truly lossless Bluetooth receiver module. This module receives Bluetooth, and the pcm5102a decoder core outputs standard single-ended analog audio signals. The audio signal can be directly added to the pre-stage or post-stage analog power amplifier without adding a DAC decoder. In order to facilitate the modification of DY friends, the module has a AUX input for external linear audio. The AUX and Bluetooth are switched by the original NEC high-precision relay. The AUX input is directly switched by the relay without any chip processing. Ensure the lossless output of AUX audio to the amplifier.
Specifications:
1. DC power input interface, GND is the negative pole of the power supply, +12 is the positive pole of the power supply. Wide voltage: 6-36V
2. AUX audio interface, LINE_INR right channel input, GND common ground line LINE_INL left channel input
3. Audio output interface, ROUT right channel output, GND common ground line OUT left channel output
4. Audio switching relay, imported from NEC, guarantees sound quality transmission and working life.
5. Bluetooth antenna buckle interface, used to install an external 2.4g antenna to enhance Bluetooth signal reception, open and unobstructed
6. Up to 20 meters or more, add an external antenna to support through-wall reception. If the module is installed in a metal chassis,
7. Install an external antenna (a 2.4G antenna like a router) to ensure complete signal reception. Outside plastic
8. No external antenna is needed on the side of the case or wooden case.
9. Bluetooth working indicator 1
10. Bluetooth working indicator
Tips:
If after the modification, the Bluetooth amplifier has a slight noise or interference noise when working, add a low-power power supply above 6-36V50MA and separate the Bluetooth module to solve the noise problem. Shared power with equipment is prone to common ground interference and noise floor
Package Included:
1 x bluetooth 5.0 Receiving DAC Decoder
What does the AUX input with relay do?
Answer: This is to help solve the problem of adding a Bluetooth receiver board to an amplifier or active speaker with only one audio input.
For example, a computer active speaker has only one input function, and you cannot plug in an external sound source such as a computer sound card or a CD player when connected to a Bluetooth receiver board. The audio input needs to be unplugged, which is very inconvenient to use. If you have an AUX input, you can use the Bluetooth AUX interface to connect computer sound cards or CD players and other external sound sources. The Bluetooth receiver board output interface is connected to the active speaker input terminal, so you do n't need to unplug the cable. AUX mode. After the Bluetooth connection, it will automatically switch the Bluetooth output, disconnecting the Bluetooth automatically switches to the AUX interface, and the power is also the AUX direct connection function.
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
