High Precision Temperature Sensor Intelligent Temperature Controller Meter with Digital Display -45°C to 125°C

Based on 0 reviews. - Write a review

$16.99

Ex Tax: $16.99

Stock: In Stock
Model: EB0044027
SKU: EB0044027

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Features:

1. Control the pump operation according to the comparison of the temperature difference between the two temperature points: high temperature/low temperature:

1) Temperature difference comparison value = high temperature value - low temperature value.

2) Temperature control operation mode: high temperature - low temperature > set temperature difference, open output, high temperature - low temperature < set temperature - hysteresis temperature, stop output.

2. The number of sensors is automatically detected at boot, no sensor is inserted or only one sensor probe is inserted, and the alarm display 0000 indicator is fully illuminated.

3. Permanent memory: power on again after power off and enter the operation according to the last set parameters and running status.

Specifications:

Number of channels: 2 channels

Sensor: Digital waterproof DS18B20 probe (1 meter)

Temperature detection accuracy: 0.1 ° C

Display resolution: 0.1 ° C

Control hysteresis accuracy: 0.1 ° C

Temperature control range: -45°C--125°C

Output drive capability: 10A, 250V

Voltage: 5-24V DC

Display Method: digital tube 0.36 inch, 4 digits

Auxiliary display module: Red yellow green LED, auxiliary indication setting parameters

Input: Touch button

Accessibility: Each relay has a purple LED indicating closed and disconnected.State switching alarm, buzzer action alarm.

Size: 94 x 62 x 18mm

Positioning hole: 88 x 56mm (M3)

Wiring Instructions:

Power supply: Blue 2P terminal + is positive, - is negative, can also be directly powered by DC power cable. Connect the power cord and turn the flat switch to ON to use.

Output: The relay output is used, and the output interface has a graphic label: the middle is the common end, the graphic connection is normally closed, and the other end is normally open.

Boot process

1. Connect the power supply and equipment to power the controller (5-24V power supply),Start detection sensor insertion.The probe is less than 2, the display shows 0000 and flashes with LED1, LED2 and LED3.

2.Insert two probes, the controller automatically reads the stored parameters.

3. Then the preset temperature difference is displayed and the yellow LED flashes 3 times (MODE).

4. Then automatically enter the working mode

Two-way temperature display has a symbol and indicator mark for use

The relay action has an audible and visual alarm.

Parameter Setting Method:

1. Press the SET button, the yellow light starts to flash, the display shows the set temperature difference, press T++ T-- to set the desired temperature difference. Display templates such as 7.1C

2. Press the SET button again, the yellow color starts to flash, the display shows the set temperature difference back difference, and press T++ T-- to set the temperature difference back difference. Display template such as H 1.2

3. Press the SET button again, the green starts to flash, the display shows the setting working mode, and press T++ T-- to set the mode. Display templates such as PP 2. PP 1 represents a one-way mode of operation and PP 2 represents a two-way mode of operation.

4. Press SET again to exit the setting, the LED is completely off, and the actual measured temperature is displayed. At this time, the system automatically saves the set parameters and starts to enter the work.

Note: After the SET, T++, T--keys are set, there is no button action within 4s, the system automatically saves the currently set parameters, then displays the measured temperature and enters the working mode. Press and hold the button to increase the key value automatically.

Package Included:

1 x High Precision Temperature Sensor Intelligent Temperature Controller
2 x Sensor Cable

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Temperature