GY-39 Serial MAX44009 Light Intensity BME280 Temperature And Humidity Atmospheric Pressure Sensor
- Stock: In Stock
- Model: EB0045718
- SKU: EB0045718
Description:
GY-39 light intensity temperature and humidity atmospheric pressure sensor module, direct serial port output
1, can be used as a simple MAX44009 or BME280 module, chip I2C communication
2, you can read all kinds of data on the module MCU, MCU calculation of the unified direct output of the calculation
of the practical data, support for serial /i2c
3, you can connect the Android mobile phone or UTB to TTL module connected to the computer via bluetooth module,
Data analysis of computer software
Name: 4 in 1 weather station module(light intensity + temperature and humidity + atmospheric pressure module)
Model: GY-39
Using chip: MAX44009+BME280+MCU
Power supply: 3-5v
Module size: 24.3*26.7mm
Communication mode:MCU_IIC/MCU_Serial / sensor chip IIC bus
Introduction:
GY-39 is a low cost, air pressure, temperature and humidity, light intensity sensor module. The working voltage is 3-5V. The power consumption is small, and the installation is convenient. The working principle is that the MCU collects various sensor data, performs unified processing, and directly outputs the calculated result. This module has two ways to read data, namely serial UART (TTL level) or IIC (2 line). The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and two output modes are requested, and the settings can be saved after power down. It can adapt to different working environments, and connect with single-chip computer and computer. The module can also set a separate sensor chip operating mode. As a separate sensor module, the MCU does not participate in data processing. Provide , 51, stm32 MCU communication program, does not provide schematic and internal MCU source code. This GY39 module also gives Android mobile phone software app to view data, and supports wifi LAN connection, mobile phone and computer display data at the same time.
Features:
1. High cost performance
2. Built-in MCU to calculate sensor data
3. IIC, serial communication format
4. Unified data output
5. With the corresponding PC software
Application:
1. Digital lighting management
2. Internet of Things, smart home applications
3. Weather station monitoring
4. Digital lighting design
5. Digital barometer, altimeter
6. Thermometer
7. Greenhouse climate monitoring
| Name | Parameter |
| Temperature measurement range | -40°-85° |
| Humidity measurement range | 0%-100% |
| Light intensity measurement range | 0.045lux-188000lux |
| Air pressure measurement range | 300-1100hpa |
| Response frequency | 10HZ |
| Working voltage | 3-5V |
| Working current | 5mA |
| Working temperature | -40°-85° |
| Storage temperature | -40°-125° |
| Size | 24.3 x 26.7mm |
| Sensor chip | ME280+MAX44009 |
| PIN Description | Parameter | |
| Pin1 | VCC | Power+ (3-5V) |
| Pin2 | CT | Serial port UART_TX/IIC_SCL |
| Pin3 | DR | Serial port UART_RX/IIC_SDA |
| Pin4 | GND | Power ground |
| Pin5 | NC | Reserved, don't connect |
| Pin6 | INT | Max44009 light intensity chip interrupt S0-1 (enabled when connected to GND) |
| Pin7 | SDA | Chip data bus S0-1 (enabled when connected to GND) |
| Pin8 | SCL | Chip clock bus S0-1 (enabled when connected to GND) |
| PinA | S0 | Serial/MCU_IIC mode selection |
| PinB | S1 | Use only sensor chip selection |
(1) PinA (S0) hardware selects the working mode, Pin2 (CT) and Pin3 (DR) is the GY-39 module communication interface
| S0=1 (default) | Serial UART mode, Pin2 is TX, Pin3 is RX, TTL level |
| S0=0 (when connected to GND) | MCU_IIC mode, Pin2 is SCL, Pin3 is SDA |
(2) PinB (S1) uses only the sensor chip ME280+MAX44009 mode to select whether the MCU participates in data processing
| S1=1 (default) | MCU+ chip mode, Pin7, Pin8, please do not have any connection |
| S1=0 (when connected to GND) | Chip mode only, Pin7 is the chip SCL bus, Pin8 is the chip SDA bus |
Package Included:
1 x GY-39 humidity atmospheric pressure sensor module
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
