GT-24 Digital Wireless Module 2.4G NRF24L01 PA LNA Industrial Grade 1100M Long Distance With Non-welding Pin

Based on 0 reviews. - Write a review

$8.99

Ex Tax: $8.99

Stock: In Stock
Model: EB0045465
SKU: EB0045465

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Specification:

Model : GT-24

Module size: 30.3 × 14.5mm (including PCB antenna)

Operating frequency band: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)

Interface mode: 1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)

Supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)

Communication level : 0.7VCC ~3.3V (VCC refers to the module supply voltage)

Measured distance: 1000m (clear open space, maximum power, height 2m, 250k air speed)

Transmit power: 4 levels adjustable (maximum 20dBm, approx. 100mW at maximum power)

Air speed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)

Shutdown current: approx. 30uA (test condition: CE=0, power-down mode, VDD=3.0V)

Emission current: about 90mA (power supply capacity must be greater than 250m)

Receive current: about 20mA

Antenna form : PCB antenna / ipex carrier antenna

Communication interface : SPI maximum speed up to 10Mbps

Transmit length: Single packet 1~32 bytes Level 3 FIFO

Receive length : Single packet 1~32 bytes Level 3 FIFO

RSSI support : Not supported (only simple packet loss statistics are supported)

Receive sensitivity: -94dBm@250kbp

Working temperature: -40 ~ +85 °C (industrial grade)

Storage temperature: -40 ~ +125 °C (industrial grade)

Features:

- The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial grade wireless transceiver integrated data transmission module.

- The module comes with a high-performance PCB antenna, precise impedance matching, and the nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission distance and lower power than the nRF24L01.

- Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in the ISM band of 2.4GHz~2.5GHz.

- The module has sufficient transmit power, good spectral characteristics, small harmonics, small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and industrial grade standards.

- It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is convenient for users to use with various circuits.

- The GT--24 module also comes with a built-in PCB antenna and an ipx carrier external antenna, which greatly enhances the module's free characteristics and gives the user the greatest freedom.

Pin Instruction:

Serial number	Name	Pin direction	Pin usage
1	VCC	/	Power supply must be between 2.0-3.6V
2	CE	input	Module control pin, see nRF24L01P Datasheet
3	CSN	input	Module chip select pin for starting an SPI communication
4	SCK	input	Module SPI bus clock
5	MOSI	input	Module SPI Data Input Pin
6	MISO	output	Module SPI Data Output Pin
7	IRQ	output	Module interrupt signal output, active low
8	GND	/	Ground wire, connected to the power reference ground
9	GND	/	Ground wire, can be used for patch fixing
10	GND	/	Ground wire, can be used for patch fixing

Package Included:

1 x GT-24 Digital Wireless Module

GT-24-Digital-Wireless-Module-24G-NRF24L01-PA-LNA-Industrial-Grade-1100M-Long-Distance-With-Non-weld-1361350

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Wireless Module