ESP32 PICO Color LCD Mini IoT Development Board Finger Computer for Arduino - products that work with official Arduino
ESP32 PICO Color LCD Mini IoT Development Board Finger Computer for Arduino - products that work with official Arduino
$51.99
Ex Tax: $51.99
- Stock: In Stock
- Model: EB0041974
- SKU: EB0041974
This is without watch accessories,If you like with watch accessories
>>>with watch accessories: Click here to BUY<<<
>>>More M5Stack Item: Click here to open<<<
>>>More M5Stack Item: Click here to open<<<
Description:
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do? This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features:
- 5V DC power supply
- USB Type-C
- ESP32-based
- 4 MByte Flash
- 6-Axis IMU SH200Q/MPU6886
- Red LED
- Buzzer
- IR transmitter
- 1 Buttons, OLED(1.3 inch), 1 Reset
- 2.4G Antenna: Proant 440
- 80 mAh Lipo Battery
- Extendable Socket
- Grove Port
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython, for
ESP32 Features:
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth
- Hall sensor
- 10x capactive touch interface
- 32 kHz crystal oscillator
- PWM/timer input/output available on every GPIO pin
- SDIO master/salve 50MHz
- SD-card interface support
PinMap:
RED LED & IR Transmitter & BUTTON A & BUTTON B
GROVE PORT
MIC (SPM1423)
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
1 x M5StickC
1 x USB Type-C cable
1 x M5Stack StickV K210 AI Camera Development Board
1 x Type-C USB Cable
RED LED & IR Transmitter & BUTTON A & BUTTON B
| ESP32 | GPIO10 | GPIO9 | GPIO37 | GPIO39 |
| RED LED | LED PIN | |||
| IR Transmitter | Transmitter Pin | |||
| Button A | Button Pin | |||
| Button B | Button Pin |
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
| ESP32 | GPIO15 | GPIO13 | GPIO23 | GPIO18 | GPIO5 |
| TFT LCD | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS |
GROVE PORT
| ESP32 | GPIO33 | GPIO32 | 5V | GND |
| GROVE port | SCL | SDA | 5V | GND |
MIC (SPM1423)
| ESP32 | GPIO0 | GPIO34 |
| MICPHONE | SCL | SDA |
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
| ESP32 | GPIO22 | GPIO21 |
| 6-Axis posture sensor | SCL | SDA |
| power management IC | SCL | SDA |
Power on / off:
Power on: Click the reset button
Shutdown: Double the reset button
datasheet
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
>>>More M5Stack Item: Click here to open<<<
Note: M5StickV does not support for microphone function, which will be added on upcoming Wifi version M5StickV+.
Description:
Note: M5StickV does not support for microphone function, which will be added on upcoming Wifi version M5StickV+.
Description:
1. M5Stack recently launched the new AIOT(AI+IOT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor.
2. M5stick-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with high energy efficiency and low cost. We co-oped with Sipeed providing the MicroPython environment makes programming onM5stick-V easier.
3.The module comes with the OmniVision OV7740 sensor, using the OmniPixel®3-HS technology, providing a best-in-class low light sensitivity, making it ideal for machine vision. In addition to an OV7740 sensor, M5stick-V features more hardware resources such as a speaker with built-in I2S Class-D DAC, IPS screen, 6-axle IMU, 200mAh Li-po battery, and more.
Features:
Dual-Core 64-bit RISC-V RV64IMAFDC (RV64GC) CPU / 400Mhz(Normal)
Dual Independent Double FPU
8MiB 64bit width On-Chip SRAM
Neural Network Processor(KPU) / 0.8Tops
Field-Programmable IO Array (FPIOA)
Dual hardware 512-point 16bit Complex FFT
SPI,I2C,UART,I2S, RTC,PWM,Timer Renhotec
AES, SHA256 Accelerator
Direct Memory Access Controller (DMAC)
Micropython Renhotec
Firmware encryption support
On-board Hardware resources:
- Flash: 16M.
- TFT: ST7789. 135*240 IPS 1.14 SPI
- Camera :OV7740
- PCM: MAX98357
-PMIC: AXP192
-Button: Front and side.
-Battery: 200mAh.
-Indicator light: RGBW .
-External storage: TF card/Micro SD
-Gy ro: MPU6886.
-Interface: CONNEXT
FUNCTIONAL DESCRIPTION:
1.1 KENDRYTE K210
The Kendryte K210 is a system-on-chip (SoC) that integrates machine vision . Using TSMC’s ultra-low-power 28-nm advanced process with dualcore 64-bit processors for better power efficiency, stability and reliability. The SoC strives for ”zero threshold” development and to be deployable in the user’s products in the shortest possible time, giving the product artificial intelligence
Machine Vision
Better low power vision processing speed and accuracy
KPU high performance Convolutional Neural Network (CNN) hardware accelerator
Advanced TSMC 28nm process, temperature area -40°C to 125°C
Firmware encryption support
Unique programmable IO array maximises design flexibility
Low voltage, reduced power consumption compared to other systems with the same processing power
3.3V/1.8V dual voltage IO support eliminates need for level shifters
1.1.1 CPU
The chip contains a high-performance, low power RISC-V ISA-based dual core 64-bit CPU with the following features:
Core Count: Dual-core processor
Bit Width: 64-bit CPU 400MHz
Frequency: 400MHz
ISA extensions: IMAFDC
FPU: Double
Platform Interrupts: PLIC
Local Interrupts: CLINT
I-Cache: 32KiB x 2
D-Cache: 32KiB x 2
On-Chip SRAM: 8MiB
1.2 OV7740
support for output formats: RAW RGB and YUV
support for image sizes: VGA, QVGA, CIF and any size smaller
support for black sun cancellation
support for internal and external frame synchronization
standard SCCB serial interface
digital video port (DVP) parallel output interface
embedded one-time programmable (OTP) memory
on-chip phase lock loop (PLL)
embedded 1.5 V regulator for core
Sophisticated Edge Rate Control Enables Filterless Class D Outputs
77dB PSRR at 1kHz
Low RF Susceptibility Rejects TDMA Noise from GSM Radios
1.2.1 SPECIFICATION
array size: 656 x 488
power supply: – core: 1.5VDC ± 5% – analog: 3.3V ± 5% – I/O: 1.7 ~ 3.47V
temperature Area: – operating: -30° C to 70°C – stable image: 0° C to 50° C
output format: – 8-/10-bit raw RGB data – 8-bit YUV
lens size: 1/5"
input clock frequency: 6 ~ 27 MHz
max image transfer rate: VGA (640x480): 60 fps – QVGA (320 x 240): 120 fp
sensitivity: 6800 mV/(Lux-sec)
maximum exposure interval: 502 x tROW
pixel size: 4.2 μm x 4.2 μm
image area: 2755.2 μm x 2049.6 μm
package/die dimensions: – CSP3: 4185 μm x 4345 μm – COB: 4200 μm x 4360 μm
1.3 MAX98357
Single-Supply Operation (2.5V to 5.5V).
3.2W Output Power into 4Ω at 5V
2.4mA Quiescent Current
92% Efficiency (RL = 8Ω, POUT = 1W)
22.8µVRMS Output Noise (AV = 15dB)
Low 0.013% THD+N at 1kHz
No MCLK Required
Sample Rates of 8kHz to 96kHz
Supports Left, Right, or (Left/2 + Right/2) Output
Sophisticated Edge Rate Control Enables Filterless Class D Outputs
77dB PSRR at 1kHz
Low RF Susceptibility Rejects TDMA Noise from GSM Radios
1.4 AXP192
Operation Voltage: 2.9V6.3V (AMR:-0.3V15V)
Configurable Intelligent Power Select system
Current and voltage limit of adaptive USB or AC adapter input
The resistance of inter
Package Included:1.5 MPU6886
1.5.1 GY RO SCOPE FEATURES
The triple-axle MEMS gy roscope in the MPU-6886 includes a wide area of features:
- Digital-output X-, Y-, and Z-axle angular rate sensors (gy roscopes) with a user-programmable full-scale area of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps and integrated 16-bit ADCs
- Digitally-programmable low-pass filter
- Low-power gy roscope operation
- Factory calibrated sensitivity scale factor
- lens size: 1/5”
- Self-test
1.5.2 ACCELEROMETER FEATURES
The triple-axle MEMS accelerometer in MPU-6886 includes a wide area of features:
- Digital-output X-, Y-, and Z-axle accelerometer with a programmable full scale area of ±2g, ±4g, ±8g and ±16g and integrated 16-bit ADCs
- User-programmable interrupts
- Wake-on-motion interrupt for low power operation of applications processor
- Self-test
1.6. ANOTHER HARDWARES
- Flash: 16M.
- TFT: ST7789. 135*240 IPS 1.14 SPI
- Button: Front and side.
- Battery: 200mAh.
- Indicator light: RGBW.
- External storage: TF card/Micro SD
- Gy ro: MPU6886.
- Interface: CONNECT.
Applications/What can M5Stick-V do?
- Face recognition/detection
- Object detection/classification
- Obtaining size and coordinates of the target in real-time
- Obtaining the type of detected target in real-time
- Shape recognition
- Video/Display
- Game simulator
Links:
- Web page - sipeed
- Quick Start Guide - M5StickV Guide
1 x M5StickC
1 x USB Type-C cable
1 x M5Stack StickV K210 AI Camera Development Board
1 x Type-C USB Cable
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
