ESP-32F Module + Adapter Board WiFi bluetooth Dual Core CPU MCU IoT for Arduino - products that work with official Arduino boards

Based on 0 reviews. - Write a review

$11.99

Ex Tax: $11.99

Stock: In Stock
Model: EB0047406
SKU: EB0047406

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Introduction:

The ESP-32F is a universal WiFi-BT-BLE MCU module that is powerful and versatile for low-power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 decoding.

The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled or powered up. The clock frequency can be adjusted from 80 MHz to 240 MHz. The user can power off the CPU and use a low-power coprocessor to constantly monitor the status changes of the peripherals or whether certain analogs exceed the threshold. The ESP32 also integrates a wide range of peripherals including capacitive touch sensors, Hall sensors, low noise sense amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO, SPI, UART, I2S and I2C.

The ESP-32F integrates traditional bluetooth, bluetooth low energy and Wi-Fi for a wide range of uses: Wi-Fi supports a wide range of communication connections and direct Internet connection via a router; bluetooth allows users to connect to mobile phones or broadcast BLE Beacon for signal detection. The ESP32 chip's sleep current is less than 5 μA, making it suitable for battery-powered wearable electronics. The ESP-32F supports data rates up to 150 Mbps and a power amplifier with an output power of 22 dBm for maximum wireless communication. As a result, the chip has industry-leading specifications and performs best in terms of high integration, wireless transmission distance, power consumption, and network connectivity.

The ESP32's operating system is a freeRTOS with LWIP and TLS 1.2 with hardware acceleration. The chip also supports OTA encryption upgrades, and developers can continue to upgrade after the product is released.

CPU:

Xtensa® 32-bit LX6 single/dual-core processor with up to 600 DMIPS

448 KB ROM

520 KB SRAM

16 KB SRAM in RTC

QSPI can connect up to 4 Flash / SRAM, up to 16 MB per Flash

Supply voltage: 2.2V to 3.6V

Working current: average: 80 mA

Package size: 18 mm x 25.5 mm x 2.8 mm

Temperature range: -40°C ~ +85°C

Clock and Timer:

Built-in 8 MHz oscillator with self-calibration

Built-in RC oscillator for self-calibration

Support for external 2 MHz to 40 MHz crystal

Supports an external 32 kHz crystal for RTC with self-calibration

2 timer groups, each consisting of 2 64-bit general-purpose timers and 1 main system watchdog

RTC timer with sub-second precision

RTC watchdog

Peripheral interface:

12-bit SAR ADC with up to 18 channels

2 8-bit D/A converters

10 touch sensors

Temperature Sensor

4 SPI

2 I2S

2 I2C

3 UARTs

1 Host SD / eMMC / SDIO

1 Slave SDIO / SPI

Ethernet MAC interface with dedicated DMA supporting IEEE 1588

CAN 2.0

IR (TX / RX)

Motor PWM

LED PWM, up to 16 channels

Hall sensor

Ultra low noise preamplifier

Wi-Fi:

Standard:

FCC/CE/IC/TELEC/KCC/SRRC/NCC

Protocol:

802.11 b/g/n/d/e/i/k/r (802.11n, speeds up to 150 Mbps)

A-PDU and A-MSDU aggregation, support 0.4 μs guard interval

Frequency Range:

2.4 ~ 2.5 GHz

Wi-Fi mode:

Station/softAP/SoftAP+station/P2P

Security Mechanism:

WPA/WPA2/WPA2-Enterprise/WPS

Encryption type:

AES/RSA/ECC/SHA

bluetooth:

Protocol:

Compliant with bluetooth v4.2 BR/EDR and BLE standards

RF:

NZIF receiver with -98 dBm sensitivity

Class-1, Class-2 and Class-3 transmitters

AFH

Audio:

CVSD and SBC audio

Package includes:

1 x ESP-32F module

1 x Adapter plate

2 x Pins

ESP-32F-Module--Adapter-Board-WiFi-bluetooth-Dual-Core-CPU-MCU-IoT-Geekcreit-for-Arduino---products--1379534

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: WiFi Module