ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI Single Relay Module Development Board

Based on 0 reviews. - Write a review

$15.99

Ex Tax: $15.99

Stock: In Stock
Model: EB0042050
SKU: EB0042050

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Feature:

1. On-board mature and stable ESP-12F WIFI module, large capacity 4M Byte Flash

2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.

3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V

4. On-board WIFI module RST reset button

5. ESP-12F supports the use of development tools such as Eclipse / Arduin IDE, and provides reference programs under the Arduin development environment.

6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V

7. Onboard power indicator, 1 programmable LED and relay indicator

Function:

1. L, N: AC90-250V power supply

2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)

3. VCC, GND: DC7-12V power supply;

4. Micro USB: DC5V USB power supply;

Note: AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.

5. 6X6mm button: ESP8266 reset button;

6. UART program download port: GND, RX, TX, 5V of ESP8266 are connected to GND, TX, RX, 5V of the external TTL serial module respectively. IO0 must be connected to GND when downloading, and then disconnected connection;

7. GPIO pin out port;

8. Relay output:

Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;

COM: public end;

NO: Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.

9. Power indication LED;

10. Programmable LED;

11. Relay Indication LED: Lights up during pull-in.

Introduction to GPIO terminal:

Number	Name	Function	Number	Name	Function
1	GND	Power ground	13	IO10	GPIO10
2	Relay	The relay drive port is driven by IO5 by default. If you want to use other I / O to drive the relay, you can remove R14, and then connect the I / 0 of the drive relay to this Relay pin	14	MISO	Slave output master input
3	IO2	GPIO2; UART1_TXD	15	IO13	GPIO13; HSPI_MOSI; UART0_CTS
4	IO4	GPIO4	16	IO14	GPI014; HSPI_CLK
5	RX	UART0_RXD; GPIO3	17	ADC	A / D conversion result. Input voltage range 0 ~ 1V, value range: 0 ~ 1024
6	3V3	3.3V power supply	18	3V3	3.3V power supply
7	SCLK	clock	19	MOSI	Master output Slave input
8	IO15	GPIO15; MTD0; HSPICS; UART0_RTS	20	IO9	GPIO9
9	IO0	GPIO0	21	CS0	Chip Select
10	IO5	GPIO5	22	IO12	GPIO12; HSPI_MIS0
11	TX	UARTO_TXD; GPIO1	23	IO16	GPIO 16
12	5V	5V power supply	24	GND	Power ground

Package includes:

1 x Development Board

ESP-12F-ACDC-Power-Supply-ESP8266-AC90-250VDC7-12VUSB5V-WIFI-Single-Relay-Module-Development-Board-1619454

ESP-12F-ACDC-Power-Supply-ESP8266-AC90-250VDC7-12VUSB5V-WIFI-Single-Relay-Module-Development-Board-1619454

Feature:

1. On-board mature and stable ESP-12F WIFI module, large capacity 4M Byte Flash

2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.

3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V

4. On-board WIFI module RST reset button

5. ESP-12F supports the use of development tools such as Eclipse / Arduin IDE, and provides reference programs under the Arduin development environment.

6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V

7. Onboard power indicator, 1 programmable LED and relay indicator

Function:

1. L, N: AC90-250V power supply

2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)

3. VCC, GND: DC7-12V power supply;

4. Micro USB: DC5V USB power supply;

Note: AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.

5. 6X6mm button: ESP8266 reset button;

7. GPIO pin out port;

8. Relay output:

Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;

COM: public end;

NO: Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.

9. Power indication LED;

10. Programmable LED;

11. Relay Indication LED: Lights up during pull-in.

Introduction to GPIO terminal:

Number	Name	Function	Number	Name	Function
1	GND	Power ground	13	IO10	GPIO10
2	Relay	The relay drive port is driven by IO5 by default. If you want to use other I / O to drive the relay, you can remove R14, and then connect the I / 0 of the drive relay to this Relay pin	14	MISO	Slave output master input
3	IO2	GPIO2; UART1_TXD	15	IO13	GPIO13; HSPI_MOSI; UART0_CTS
4	IO4	GPIO4	16	IO14	GPI014; HSPI_CLK
5	RX	UART0_RXD; GPIO3	17	ADC	A / D conversion result. Input voltage range 0 ~ 1V, value range: 0 ~ 1024
6	3V3	3.3V power supply	18	3V3	3.3V power supply
7	SCLK	clock	19	MOSI	Master output Slave input
8	IO15	GPIO15; MTD0; HSPICS; UART0_RTS	20	IO9	GPIO9
9	IO0	GPIO0	21	CS0	Chip Select
10	IO5	GPIO5	22	IO12	GPIO12; HSPI_MIS0
11	TX	UARTO_TXD; GPIO1	23	IO16	GPIO 16
12	5V	5V power supply	24	GND	Power ground

Package includes:

1 x Development Board

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Relay