EPM5800-E AC/DC Power Meter Watt Meter Electrical Paremeters Tester Power Supply Driver Tester

Based on 0 reviews. - Write a review

$68.73

Ex Tax: $68.73

Stock: In Stock
Model: EB003245
Dimensions: 128.00mm x 135.00mm x 32.00mm
SKU: EB003245

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Specification:

The parameters of the meter:

Work Voltage	AC85V~265V	Power Consumption	<2W	Operating Frequency		45~65Hz
Sampling Rate	2 times /s		Display mode	8 0.56 inch digital LED display
Over Range Display	"HHHH"	Dimension	128.0mm x 135.0mm x 32.0mm[1]	Installation	Screw installation
Operating Temperature	0~50		Work Environment Humidity	≤85% RH

AC Measurement Parameters:

AC Power Measurement Range	0~2500W	Power Resolution	0.01W[2]	Power Measurement Accuracy	0.5%FS
AC Voltage Measurement Range	AC85V~265V	Voltage Resolution	0.1V	Voltage Measurement Accuracy	0.5%FS
AC Current Measurement Range	AC0~10A	Current Resolution	0.001A	Current Measurement Accuracy	0.5%FS
Power Factor Measurement Range	0~1.000	Power Factor Resolution	0.001	Power Factor Measurement Accuracy	0.5%FS
Frequency Measurement Range	45.0Hz~65.0Hz	Frequency Resolution	0.1Hz	Frequency Measurement Accuracy	0.5%FS

DC Measurement Parameters:

DC Power Measurement Range	0~3000W	Power Resolution	0.01W[2]	Power Measurement Accuracy	0.5%FS
DC Voltage Measurement Range	DC0~300V	Voltage Resolution	0.01V	Voltage Measurement Accuracy	0.5%FS
DC Current Measurement Range	DC0~10A	Current Resolution	0.001A	Current Measurement Accuracy	0.5%FS

AC/DC Measurement Parameters (Efficiency):

Efficiency Measurement Range

0~100%

Efficiency Resolution

0.1

Efficiency Measurement Accuracy

0.5%FS

Note:

[1] Its dimension is including the panel,without panel the depth is 29.0mm.

[2] When the Load(AC or DC)Power <100W,The Measurement Resolution is 0.01W,when the power>100W, the Measurement Resolution is 0.1W,when the power>1000W ,the Measurement Resolution is 1W.

Panel illustrate and Wiring instructions

EPM5800-E-ACDC-Power-Meter-Watt-Meter-Electrical-Paremeters-Tester-Power-Supply-Driver-Tester-1092754

Wiring instruction:

1. From the Back of the meter, the left Terminal 1, 2 connect AC85V~265V; Left Terminal 3,4 connect the input of Drive power;

2. From the Back of the meter, the right Terminal 1,2 connect the output of Driver,1 is positive, 2 is negative, Terminal 3,4 connect the Load, 3 is positive, 4 is negative.

Wiring must be connected as shown above method, or it may cause damage to the tester.

Note: EPM5800-E is No shell. There is high voltage when powered on, Banned any part of the body contact the circuit board.

Button

Power Factor / Frequency switch

Press the left button “PF/FREQ(INC)“when steady working to switch to show Power Factor or Frequency.

Matters needing attention

1. The tester can’t work in hot and humid conditions,please use it in normal conditions;

2. From the Back of the meter, the left Terminal 3,4 connect the input of the Power Supply, the right Terminals 1,2 connect the output of the Power Supply ,don’t connect the reverse side;

3. The tester’s working voltage can’t exceed AC265V, DC voltage can’t exceed DC300V;

4. If work current greater than 10A or the load shorted could lead to the fuse damaged, then need to replace a new 10A fuse;

5. Do not expose the tester to dusty, corrosive gases and other harmful substances in the environment when store and using;

6. Don’t touch any part except for the panel when the tester is working, the tester with high voltage may cause electric shock.

Frequently problems

1. The tester doesn’t work with power supply, please check the Power cord connection.

2. The tester display “O”, which may be the Fuse damaged, please replace a new Fuse.

Hole size (unit mm):

EPM5800-E-ACDC-Power-Meter-Watt-Meter-Electrical-Paremeters-Tester-Power-Supply-Driver-Tester-1092754

Package included:

1 x EPM5800-E AC/DC Power Meter Watt Meter

Detail Pictures:

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!