Driver Module
Description:
1. STMicro's L6470 (a.k.a "dSPIN") is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent detection, undervoltage detection, overtemperature detection, stall detection, a 5-bit ADC, and a switch input that can be used for either user jog control or as a hard stop f..
$10.99
Ex Tax:$10.99
>
Descriptions:
- Module supply voltage: 2.5-12V
- Suitable Motor range: between motor operating voltage 2.5v-12V, the maximum operating current of 0.8A
- PCB board size: 2.8cm * 2.1cm ultra-small size, suitable for assembly
- Is provided with a fixed mounting holes, diameter: ..
$7.99
Ex Tax:$7.99
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation ..
$4.99
Ex Tax:$4.99
Voltage: DC5V
Precise details>>
Precise details:
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase s..
$6.99
Ex Tax:$6.99
Precise details:
Note: The controller defaults to burn 1366 * 768 B156XW02 (40P 8-bit) resolution program, NOT suitable for other resolution, please note!!!
If your screen is 1366*768 (40 pin 8-bit) , if the screen is not normal after installation, please use the following methods..
$23.99
Ex Tax:$23.99
>
Specifications:
Input voltage: AC110/220V
Output voltage: DC12-17V
Output current: 200-300mA(adjustable)
Product size: 55*29*21mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥90%
Power factor: 0.9
Product application: spotlight PAR light / bulb light / candl..
$5.99
Ex Tax:$5.99
Feature:
1. This is a new type of integrated liquid crystal display control motherboard. The main chip uses the new chip TSUMU58CDT9-1 of Chenxing Semiconductor
2. It can support VGA and HDMI input. If the HDMI signal is connected to the HDMI signal, the 3.5 audio socket of the motherboard can sup..
$17.99
Ex Tax:$17.99
>
Description:
FAN is designed with an N20 Motor and a small fan piece is included in the package. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Product Features:
single-direction rotation 5V-DC Simple DC motor with..
$8.99
Ex Tax:$8.99
Voltage: DC3-5V
Precise details>>
Precise details:
Feature: Input voltage DC4.5-25V, 600mA output current capability per channel 1.2A PEAK output current(non repetitive) per channel ..
$3.99
Ex Tax:$3.99
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Stepper Motor Driver
Voltage: 12V,DC5V
Precise details>>
Precise details:
Features:
1. As a square wave signal generator,generates a square wave signal used for experimental development.
2. Used to drive a ste..
$2.29
Ex Tax:$2.29
Voltage: 12V
Precise details>>
Precise details:
Overview:
The control panel of the spot welding machine is a controller which is independently developed for the DIY or the simple ..
$13.99
Ex Tax:$13.99
>
Overview:
This product is mainly used for spot welding machine, seam welding machine, and roll welding machine welding control.
The rear end drive thyristor module of this product can not drive other loads.
This product is precisely digitally programmed through CPU to achieve precise contro..
$68.99
Ex Tax:$68.99