Disassemble & Maintenance Tools
Instructions: Component surfaces do general cleaning, adhesive bonding, can be cured at room temperature. Features: 1. Shred of good, easy to operate, suitable for pipeline operation; 2. The film toughness, impact resistance, shock; 3. Permeability good;&nb..
$4.77
Ex Tax:$4.77
Features: Low odor, high transparency. High bonding strength, low viscosity and easy deaeration. Easy to use. 220-260nm light source helps surface cure. Used in large area glass crystal bonding. For glass mosaic, glass crafts, crystal crafts and other products bonding.Specification: Ap..
$9.99
Ex Tax:$9.99
Please Note that LED UV light doesn't include~Features: K-302 is a high-intensity UV-curable acrylate adhesive, good versatility good storage stability. Dedicated to the bonding glass and various metals fixed, for glass, crystal and metal, such as: aluminum, carbon steel, stain..
$12.99
Ex Tax:$12.99
Features: transparent plastic used in such as: PMMA, PVC, ABS and other self-adhesive and stick each other, as well as glass, metal bonding between the surface dry better.Use: product packaging, gift wrap, card, acrylic toys, transparent plastic photo frames. Instructions:The first step, surfac..
$8.63
Ex Tax:$8.63
Features:K-303 is dedicated to the adhesive acrylic (PMMA) or acrylic adhesive between the glass and metal between the high adhesive strength, eg., acrylic billboards, adhesive acrylic products, but also for other transparent plastics such as PC, PVC, PS, ABS and other plastics adhesive ..
$7.85
Ex Tax:$7.85
Features:Low odor, high transparency, high bonding strength, low viscosity and easy deaeration.Usuful, convenient, small, portable. You are worth buyying it.With the design of UV Light, it can make the glu fix in time.It meets environmental requirements and can be used at ease.UV Light Adhesive only..
$8.47
Ex Tax:$8.47
Specification:Base chemical composition: cyanoacrylateAppearance: colorless transparent liquidViscosity (mPa.s): 15 ～ 25Specific gravity: 1.05Flash point (℃): ＞ 80Maximum filling gap (mm): 0.10Curing time at room temperature (s)Steel: 10 ～ 20Rubber: <5PVC: 10 ～ 15Performance after curing:Full sol..
$3.88
Ex Tax:$3.88
Features:A new type of single-component, toughened, low viscosity multifunctional instant adhesives. Fast curing at room temperature, low odor, low whitening, good toughness, high bonding strength, very easy to use, widely used in metal automobile and motorcycle industry bonding wood, metal, ceramic..
$2.55
Ex Tax:$2.55
Features:White thixotropic elastomerOne-part,room cureGood cold and hot toleranceThermal conductivity 1.2K-5202 is a reinforced thermally conductive silicone elastomer with great adhesion, insulation and dissipationOne part, room cure, packing in soft metal tubeExcellent in cold and high alternating..
$4.99
Ex Tax:$4.99
Features:This product is a neutral through reinforced silicone elastomer gel, both bonding effect, and good thermal conductivity (heat), thermal effect is excellent, with good resistance to high temperature curing adhesive Changes performance, long-term use will not fall off, no contact with the gap..
$4.66
Ex Tax:$4.66
Features: K-5204K both silicone thermal plastic bonding effect, and good thermal conductivity (heat dissipation) properties. After a neutral silicone elastomer reinforced plastic, after curing adhesive has good resistance to changes in the level performance, long-term use will not fall off, n..
$8.99
Ex Tax:$8.99
Specification: Appearance: White paste. Penetration (1/10mm, 25 C): 260~300 Specific gravity (g/cm3): 1.9~2.1 Oil ionization (%, 200 c, 8h): ≤2 Volatile (%, 200 c, 8h): ≤2 Breakdown voltage intensity (kv/mm): ≥10 Volume resistance (omega.Cm): 4 x 1014 Thermal conductivity (w/m..
$4.61
Ex Tax:$4.61