DC10-50V 19A 350W High-Power Power Supply Module With LED Digital Display Power Fan Automatic Lifting Voltage

Based on 0 reviews. - Write a review

$68.28

Ex Tax: $68.28

Stock: In Stock
Model: EB0044466
SKU: EB0044466

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Product Parameters:

Module nature: DC non-isolated automatic step-up and step-down module

Input voltage: DC 10V-50V (50V is the upper limit voltage, over 50V, the module must be burned, please leave a margin when using, preferably the input voltage is below 50V, and pay attention to the upper limit of the input voltage fluctuation range)

Output voltage: DC 10V-50V

Output current: Maximum 19A (current magnitude is related to differential pressure, temperature, etc. When high current, chip overheating will automatically reduce output power; over-temperature will automatically turn off the output, and the fan will dissipate heat in normal ambient temperature, the output current can be 10A-17A is stable for a long time of operation, different output voltages, maximum operating current will be different due to the maximum limit power)

Conversion efficiency: Highest 96% (when the input and output voltages are different, the conversion rate will be different )

Output power: Up to 350W (the maximum output current varies with different output voltages due to maximum power)

Switching frequency: 65Hz

Output ripple: 150mv (20M bandwidth)

Load adjustment rate: +/-0.5%

Voltage regulation rate: +/- 2.5%

Working temperature: -40 degrees to +85 degrees

Output voltage ammeter: Voltmeter strap current strap (up to 19.9A)

Power indicator: Yes (blue)

Charging indicator: Yes (red, blue power indicator is off when charging, red light is on)

Full of lights: Yes (blue, when the battery is fully charged, the red light is off.)

Constant current indicator: Yes (green)

Over temperature protection: Yes (over temperature automatic shutdown output)

Input anti-reverse protection: Yes (can be reversed for a long time, no burning module)

Output overvoltage protection: Yes (output voltage exceeds 51V, the module will enter the protection state of the output voltage locked at 51V output)

Fan temperature control: Yes (automatic stop or start according to working conditions)

Fan: Yes (DC 12V high quality double ball bearing fan)

Weight: 360g

Product size: 113*78*56mm (height includes fan)

Application Scenario:

1. DIY off-site charge, only input terminal to access gasoline car 12V or diesel car 24V. It can also directly connect 12V or 24V solar panel (12V solar panel no-load maximum output voltage 21V, 24V solar panel no-load maximum output voltage 42V), the output voltage can be freely and continuously adjusted within the range of DC10-50V.

2. DIY off-site charging source, just connect 3S-6S lithium battery or 4S-8S iron lithium at the input end, and the output voltage can be freely and continuously adjusted within the range of DC10-50V.

3. DIY ground charging station.

4. The electronic equipment supplies power, adjusts to the voltage required by the equipment, and the current does not exceed the rated current, it can work normally.

5. Efficient high-power buck-boost and system front-stage power supply.

Notes:

1. The automatic step-up and step-down module can change the output voltage by adjusting the blue adjustable resistor on the module, and the output voltage adjustment range is between DC10-50V.

2. The module is marked with: IN- (input negative), IN+ (input positive), OUT- (output negative), OUT+ (output positive); please connect and use correctly, wrong or improper use, there is a risk of damage to the module.

3. Change the output voltage by adjusting the blue adjustable resistor on the board. The output voltage adjustment range is DC10-50V. Please do not use it beyond the adjustment voltage range. If the output voltage exceeds 53V, the module will burn the component due to overpressure.

Package Included:

1 x Automatic Lifting Voltage Constant Current Constant Voltage Power Supply Module

DC10-50V-19A-350W-High-Power-Power-Supply-Module-With-LED-Digital-Display-Power-Fan-Automatic-Liftin-1358234

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Power Supply Module