Circuit Modules & Development Board
Instruction: https://www.renhotecic.com/image/download/pdf/20180510042547VAT-Quick-Guide.pdfFeature: VAT series is a multi-function meter based on 2.4G wireless data transmission technology. It can measure miscellaneous parameters such as voltage, current, power, charge and discharge capacity, w..
$52.66
Ex Tax:$52.66
>
Instruction: https://www.renhotecic.com/image/download/pdf/20180510042547VAT-Quick-Guide.pdfFeature:
VAT series is a multi-function meter based on 2.4G wireless data transmission technology.
It can measure miscellaneous parameters such as voltage, current, power, charge a..
$56.99
Ex Tax:$56.99
>
VCO rf voltage-controlled oscillator:
The voltage-controlled oscillator is an LC type oscillator.Has good frequency stability, high control sensitivity, wide frequency range, frequency deviation and control voltage linear relationship and suitable for use.This module can be used for P..
$18.99
Ex Tax:$18.99
Package Included:1 x Vehicle Charger Motherboard Module 5V 2.4A ..
$6.99
Ex Tax:$6.99
Feature: Efficiency: 68% Maximum capacitive load: 330uF Size: 28 x 18 x 16mm Input voltage range: AC85V-264V, DC100V-375V Input frequency range: 47-63Hz No-load power consumption: 0.2W Input current: 115VAC 60MA, 230VAC 30MA Output voltage accuracy: ±3% Linear adjustment rate: ± 1.5% full load Loa..
$6.99
Ex Tax:$6.99
>
VGA 666 Adapter Board For Raspberry Pi 3 Model B 2B B+ A+Description:
It is a neat and very useful solution for using a VGA screen / monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (u..
$11.99
Ex Tax:$11.99
Features: 1. High sensitivity for low-light operation 2. Low operating voltage for embedded application 3. Standard SCCB interface compatible with I2C interface 4. With AL422 3M-Bits FIFO. 5. Raw RGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format. 6. Support VGA, CIF..
$9.99
Ex Tax:$9.99
>
Features:
1. High sensitivity for low-light operation
2. Low operating voltage for embedded application
3. Standard SCCB interface compatible with I2C interface
4. With AL422 3M-Bits FIFO.
5. Raw RGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output fo..
$5.39
Ex Tax:$5.39
>
VGA Shield V2.0 Expansion Board For Raspberry Pi 3B / 2B / B+ / A+
Extend a VGA interface via GPIO and remain HDMI.Note: Raspberry Pi main board is not included.How to use:
1. Copy the two files(from setup.zip) to system card;
2. Open the file "config.txt" and append the followin..
$11.98
Ex Tax:$11.98
>
Feature:
Function introduction: Test module based on VGA interface and PS2 interface
Typical application: VGA, PS2 test
Main resources: VGA interface, PS2 interface, control interface
Package includes:
1 x Adapter..
$9.99
Ex Tax:$9.99
Feature:Update information: Add audio output interface 3.5mm interface, and speaker output JST 2.0 PH 2-Pin interface Hardware Specifications Chipset TTGO Micro32 FLASH QSPI flash 4MB / PSRAM 8MB SRAM 520 kB SRAM Button Reset, IO36 Extended..
$21.99
Ex Tax:$21.99
Specifications: Model:XH-M600 Control Voltage :DC 6-60V Control Current: max 30A Control Precision:0.1V Output Type:direct output Voltage Tolerance:+/-0.1V Application Fields: DC 6-60V battery Size: 84*60mm Using Method: 1:connect to battery(if not,won't have display) 2:press the "+" display u..
$11.99
Ex Tax:$11.99