Menu
Your Cart

Circuit Modules & Development Board

> 2Pcs Tilt Angle Sensor Module With Cable For STM32 AVR Raspberry PiSpecification: Working Voltage: 3.3V ~ 12V Location hole diam: 3.1mm PCB board size: 16 x 14mm With 4pcs 20cm cablePackage included: 2 x Tilt angle sensor module 4 x 20cm cable ,,..
$5.99
Ex Tax:$5.99
Voltage: DC5V Precise details>> Precise details: Specifications:Working voltage: DC 3.3-5VPositioning hole size: 3mm in diameterControl signal: digital signalSize: 34 x 22 x 9mmPackage included:1 x Module..
$2.15
Ex Tax:$2.15
Specifications:  1. Power-on reset automatically;2. The delay time adjustment range of about 10 seconds to 24 hours;3. Current output voltage ratio parameter:3V/300mA;5V/200mA;9V/100mA4. Input voltage:3.3-18V5. It can drive 3V/5V/12V relay/LED and so on.6. Function:delay switch,timer,timer light etc..
$5.99
Ex Tax:$5.99
Voltage: DC5V Precise details>> Precise details: Description:   1. onboard TJA1050 CAN controller interface chip 2. chip commonly used pin has led, convenient connection to use 3. pin 5 v ..
$5.99
Ex Tax:$5.99
Control Channels: 1 Channel Voltage: DC 12V,DC 24V,DC5V Precise details>> Precise details: Specifications:   Voltage: 5V/12V/24V Quiescent current 2V, 0.5mA Response time: 50mS   Features: ..
$5.99
Ex Tax:$5.99
> Specification:   Model: TKG2R-101 I/O points: 1 Input signal: NPN and PNP compatible Input voltage: DC12V Output voltage: AC/DC 0-250V Output Contacts: 1CO(SPDT) Contact capacity(resistive): 10A 250VAC Operation voltage/Release voltage: ≥75%Un/≤10%Un Operation ti..
$6.75
Ex Tax:$6.75
Specification:   Model: TKG2R-1E-K424 Output type: Relay I/O points: 4 Input signal: NPN and PNP compatible Input voltage: DC24V Output voltage: AC/DC 0-250V Output Contacts: 1CO(SPDT) Contact capacity(resistive): 10A 250VAC Operation voltage/Release voltage: ≥75%Un/≤10%Un Operation time/Release tim..
$14.99
Ex Tax:$14.99
> Specifications:   Working voltage: 4-40V DC Module power consumption: 0.6W (static 0.1W) Signal input: active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V. Response speed: K1 K2 is 20mS, SW1 SW2 is 50mS. ..
$11.99
Ex Tax:$11.99
Content-Length: 2027 > Function Description:   TL494 PWM regulator module, can adjust the output frequency and duty radio, widely used in switching power supplier, PWM drive circuit.  Feature:   PWM output frequency in the range 500Hz-100KHz can be adjustable,..
$8.99
Ex Tax:$8.99
> Product application:   The TLV3501 is a single channel high speed push-pull output comparator with a delay time of 4.5ns, supply voltage: + 2.7V to +5.5V, and an excellent range of input common mode range beyond the swing input, making it ideal for low voltage applications. Rail to rail output..
$16.99
Ex Tax:$16.99