Circuit Modules & Development Board
>
Feature:
Ambient temperature: -20 ° C ~ 60 ° C
Use ambient humidity: =200H (continuous work)
Motor model: 140 type 5500RPM/MIN
Model
Voltage Scope (DC)
Current (A)
Power (W)
Max. Water Head (M)
Max. Flow Rate (L/..
$14.99
Ex Tax:$14.99
Description: Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conv..
$6.99
Ex Tax:$6.99
Specification:The power indicator LED and switch trigger timing indication LEDsTime delay can be adjusted, ( 0-120 seconds)For applications of Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devicesSize: 40 x 20mmWorking voltage: 5-12VFeature..
$22.98
Ex Tax:$22.98
>
Feature:Size: 7.5 x 4.5 x 3cm
Cable length: 90cm
Net weight: 98g
Output: DC 5V, 3A
Plug: EU plugPackage includes:10 x US Power Supply..
$70.99
Ex Tax:$70.99
Description:Light source: 5050 RGB SMDSheet material: aluminum substrateIC models: WS2811Gray levels: 256Light Angle: 180 °Emitting light colors: can through the controller tuning for, white, red, yellow, blue, green, etcStandard working voltage: DC 5 vPower: 0.3 W + / - 0.01%Waterproof level: not w..
$7.99
Ex Tax:$7.99
>
10Pcs DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver BoardDescription:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, e..
$26.99
Ex Tax:$26.99
10Pcs DC 5V KY-003 Hall Magnetic Sensor Module For Description:Brand:RenhotecModel: KY-003Magnetic, speed, gap inductionSuitable for DIY projectWorking voltage: DC 5VMaterial: PCBFeature: Small size and high sensitivity. Fast response temperature and good performance. Precision and high reliabilit..
$15.99
Ex Tax:$15.99
>
Introduction:
1. The power supply: 5V
2. Module size: 52.8mm x 32mm x 18mm
3. According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, and then press the button to disconnect, low level trigger. Power on..
$22.99
Ex Tax:$22.99
Content-Length: 2284
>
Features:
Mini wide voltage DC motor governor, using the latest low voltage drive technology, suitable for voltage wide DC5-35V (5-9V input needs to be shorted), with self-recovery fuse, also suitable for LED dimming.
Spe..
$19.99
Ex Tax:$19.99
Specification: Working voltage: 5V. Standby current: ≤ 1mA. Working current: ≤90mA. Standby light: Yes. Extended time: adjustable 3 seconds to 130 seconds. Trigger mode: touch. Board size: 38.5mm x 28.5mm Package Included: 10 x Touch Delay Light..
$29.99
Ex Tax:$29.99
Description:This Fan system is using for RIDEN® CNC power supply module.Package included:10 x 3cm Fan System10 x cable..
$26.99
Ex Tax:$26.99
>
Description:
1. The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0V to 5V pulse. (or 0V to 3.3V pulse if you solder SJ2 closed on the EasyDriver)
2. EasyDriver requires a 7V to 30V supply to power the motor and can power any..
$22.99
Ex Tax:$22.99