OV2640 Binocular Camera Module CMOS STM32 Driver 3.3V 1600*1200 3D Measurement with SCCB Interface for Arduino - products that work with official Arduino boards

Based on 0 reviews. - Write a review

$41.99

Ex Tax: $41.99

Stock: In Stock
Model: EB0047564
SKU: EB0047564

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

>>>Manual: Click here to open<<<

Product Introduction:

The OV2640 binocular camera module is made with two 1/4-inch OV2640 million HD CMOS sensors. It has high sensitivity, high flexibility, and support for JPEG output. It can work in the same way as binocular camera, and can be applied to many occasions such as binocular ranging, 3D measurement and so on. The camera can be driven by STM32, which is very convenient to use, and the camera configuration can be freely carried out, which greatly increases the flexibility of the application.

Features:

- High sensitivity, low voltage for embedded applications

- Standard SCCB interface, compatible with I2C interface

- RawRGB, RGB (GRB4: 2: 2, RGB565/555/444)

- YUV (4:2:2) and YCbCr (4:2:2) output formats

- Built-in embedded microprocessor

- Support for image scaling, panning, and window settings

- Support image compression to output JPEG image data

- Integrated active crystal 12M, no external clock required

- Integrated LDO, only need to supply 3.3V to work properly

- Support UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and various sizes up to 40x30 size

- Support automatic exposure control, automatic gain control, automatic white balance,

- Automatically eliminates light streaks and automatic black level calibration. Image quality control includes settings such as color saturation, hue, gamma, and sharpness ANTI_BLOOM.

Specifications:

Sensor size: 1/4 inch

Pixel: 1600*1200 (200W)

Control interface: SCCB

Working voltage: 3.3V

Module size: 27mmX27mm

Output format: RGB565/JPEG/YUV/YCbCr, etc.

Sensitivity: 0.6V/Lux-sec

Signal to noise ratio: 40dB

Dynamic range: 50dB

Lens aperture: F2.0

Lens angle of view: 78°

Lens focal length: 3.6MM

Lens filter: 850nm, infrared filter

Working temperature: -30~+70

Power consumption: 40mA

IO port level: 2.8v LVTTL, compatible with 3.3V

Output bit width: 8 bits

Data interface: 8-bit data

Control interface: SCCB (Class IIC protocol)

Output format: RawRGB, RGB (RGB565/RGB555), GRB422, YUV (422/420), YCbCr (422), JPEG data

Output pixels: UXGA (1600 * 1200) and below to any size of 40 * 30

Package Included:

1 x OV2640 Binocular Camera Module

OV2640-Binocular-Camera-Module-CMOS-STM32-Driver-33V-16001200-3D-Measurement-with-SCCB-Interface-Gee-1548019

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Camera Module