3pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
- Stock: In Stock
- Model: EB0045453
- SKU: EB0045453
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description:
| Pin | The name of the discipline | Function |
| 1 | GPI01 | Input-output IO, which can be configured by AT+CLSS |
| 2 | GPI02 | Input-output IO, which can be configured by AT+CLSS |
| 3 | GPI03 | Input-output IO, which can be configured by AT+CLSS |
| 4 | GPI04 | Input-output IO, which can be configured by AT+CLSS |
| 5 | GPI05 | Input-output IO, which can be configured by AT+CLSS |
| 6 | GPI06 | Input-output IO, which can be configured by AT+CLSS |
| 7 | GPI07 | Input-output IO, which can be configured by AT+CLSS |
| 8 | GPI08 | Input-output IO, which can be configured by AT+CLSS |
| 9 | VCC | Power supply (2.2-3.6) |
| 10 | RXD | Serial port input pin |
| 11 | TXD | Serial port output pin |
| 12 | SET | AT command switching pin (low level AT instruction, high level transparent transmission) |
| 13 | CS | Transmission or push button mode: CS pin (low level wake-up, high level sleep). IO receive mode:the CS pin needs to be suspended or pulled up |
| 14 | GND | Power supply |
Application scene:
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4: one to many control of mobile phone
5:IO switching control
6:2.4G toys
7: smart home control application
Technical parameter:
| Model | JDY-40 |
| Working band | 2.4G |
| Emissive power | Maximum 12dB |
| working temperature | -40 C - 80 C |
| Reception sensitivity | -97db |
| transmission distance | 120 meters |
| working voltage | 2.2V-3.6V |
| TX current | 40mA |
| RX current | 24mA |
| Sleep current | 5uA |
| communication interface | Standard TTL serial port |
Default configuration:
| sequence | function | parameter | instructions |
| 1 | baud rate | 9600 | AT+BAUD |
| 2 | wireless ID | 8899 | AT+RFID8899 |
| 3 | device ID | 1122 | AT+DVID1122 |
| 4 | channel | 001 | AT+RFC001 |
| 5 | emissive power | 12db | AT+POWE9 |
| 6 | equipment type | A0 | AT+CLSSA0 |
Communication:
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions:
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query - baud rate:
| instructions | response | response |
| AT+BAUD | OK | Param(1-7) 1:1200 2:2400 3:4800 4:9600 5:14400 6:19200 Default value:4 |
| AT+BAUD | +BAUD= |
Set / query -RFID:
| instructions | response | response |
| AT+RFID | OK | Param(0000-FFFF) Default value:8899 |
| AT+RFID | +BAUD= |
Set / query -DVID:
| instructions | response | response |
| AT+DVID | OK | Param(0000-FFFF) Default value:8899 |
| AT+DVID | +BAUD= |
Set / query -RFC:
| instructions | response | response |
| AT+RFC | OK | Param(001-128) Default value:001 |
| AT+RFC | +RFC= |
Set / query -POWE:
| instructions | response | response |
| AT+POWE | OK | Param(0-9) 0:-25db 1:-15db 2:-5db 3:0db 4:+3db 5:+6db 6:+9db 7:+10db 8:+10db 9:+12db Default value:9 |
| AT+POWE | +POWE= |
Set / query -CLSS:
| instructions | response | response |
| AT+CLSS | OK | Param A0:serial port transmission (transceiver) C0: remote control or IO button with indicator (transmitter). C 1: remote control or IO button without indicator (transmitter). C 2:IO normally high level, after receiving the signal, low level, delay. High level after 30mS C 3:IO is usually low level, after receiving the signal, the high level has been Recovery of low level after delayed 30mS C 4:IO is usually low level, and receives the high level of the pressed signal. Receive raised signal low level The IO level is reversed when the C 5:IO receives the pressed signal. Default value: A0 |
| AT+CLSS | +CLSS= |
Package included:
3 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
