Sensor & Detector Module
Features: 1. having a signal output instruction; 2. with a TTL level signal, and the analog output signal; 3. the output valid signal is high, the light goes out; 4. the sensitivity is adjustable (fine-tuning); 5. wide detection of vibration, no direction; 6. with mounting holes, firmware installa..
$12.30
Ex Tax:$12.30
Feature: Name: AM2302B temperature and humidity module Power supply voltage vin: dc3.3-5.5v Output signal: single bus digital signal Display resolution: 0.1°C or 0.1%RH Temperature detection range: -40~80°C Temperature detection accuracy: +-0.5°C Humidity detection range: 0-99.9%RH Humidity detectio..
$15.24
Ex Tax:$15.24
Feature: The Current Sensor ACS712 provides economical and precise choice for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.Pac..
$16.99
Ex Tax:$16.99
>>>Manual: Click here to open..
$10.99
Ex Tax:$10.99
>>>Manual: Click here to open..
$10.99
Ex Tax:$10.99
>>>Manual: Click here to open..
$9.99
Ex Tax:$9.99
Voltage: 5V(USB) Precise details>> Precise details: Description : The current sensor model : ACS712ELC5v power supply, Onboard power light indicatorModule can measure +5 or -5 current, corresponding to ..
$13.00
Ex Tax:$13.00
Feature: Active buzzer, no frequency signal, only need to offer signal to level can soundSuitable for button prompt, prompt warning and so on Specification: Size: 26 * 21mmVoltage: 5VPort: Digital levelPlatform: , microcontroller Package includes: 3 x Active Buzzer Module ,,,,,..
$8.99
Ex Tax:$8.99
Features:This module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog channel input, the internal integration of a gain programmable amplifier 128. Input circuit can be configured to provide an electrical bridge bridge vol..
$7.99
Ex Tax:$7.99
Feature: Single chip silicon bipolar device, amplitude / phase measurement The AD8302 is a fully integrated RF IC that measures the amplitude and phase between two independent input signals. The device operates from low frequencies to 2.7 GHz. The AD8302 contains two precision-matched wideband log a..
$19.99
Ex Tax:$19.99
Features: Digitally programmable frequency and phase 12.65 mW power consumption at 3 V 0 MHz to 12.5 MHz output frequency range 28-bit resolution: 0.1 Hz at 25 MHz reference clock Sinusoidal, triangular, and square wave outputs 2.3 V to 5.5 V power supply No exter..
$23.99
Ex Tax:$23.99
Description: 1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and anal..
$7.99
Ex Tax:$7.99