Sensor & Detector Module
Feature: Current Sensor Chip: ACS712ELC-05A Pin 5V power supply, onboard power indicator The module can measure positive and negative 20 amp current, corresponding to analog output 185mV/A When no sense current is passed, the output voltage is VCC/2 PCB board size: 27.4 (mm) x 11.8 (mm)Package inclu..
$9.99
Ex Tax:$9.99
Description: 1. onboard precision micro current transformer2. high precision op-amp circuit board, do accurate sampling for the signal and appropriate compensation, and other functions3. the module can measure within 5A current communication , corresponding to output analog quantity can be adjusted4..
$15.99
Ex Tax:$15.99
>
Description:
1, the onboard precision micro current transformer.
2, the onboard sampling resistor .
3, module can be measured within 5 a alternating current, the corresponding analog output 5 A/ 5 mA
4, PCB board size: 18.3 (mm) x17 (mm).
Package included:
3 x 5A Range Single-phase AC C..
$9.99
Ex Tax:$9.99
Feature:Size: 12.7 x 12.7 x 75mmForce variation output: Voltage signalOperating voltage range: 2.6 to 5.5VOperating temperature range: -20 to + 85 ℃Power consumption (including power supply circuit): Typical operating current:..
$17.99
Ex Tax:$17.99
Descrition:The current sensor chips: ACS712ELC-30A The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A Pin 5V power supply, on-board power indicator Using gold plated circuit boards No test current through the output voltage is VCC / 2 Size: 31 x 13m..
$12.99
Ex Tax:$12.99
Driver: Click here to openDescription: USBtinyISP is designed for AVR ,based on USB connector's ISP downloader.Officially supported by for IDE and compatible usbtinyisp,we can burn for bootloader onto chips, and practically program any AVR microcontroller by this powerful AVR ISP programmer.The Ti..
$11.99
Ex Tax:$11.99
>
Applications:
The vibration trigger alarm can be directly used in various high current and high voltage applications.
Features:
1. With SW-420 sensitive and normally closed vibration sensor;
2. The shock sensor can be externally connected to the detection position, ..
$14.99
Ex Tax:$14.99
Feature: This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low. Specification: Adjustable time delayAdjustable sensitiveConnection for CDS sensor (day/night)Input..
$10.43
Ex Tax:$10.43
>
Features:
1. Adopt sensitive photosensitive resistance sensor
2. Comparator output, clean signal, good waveform, strong driving ability, more than 15mA.
3. Adjustable potentiometer, can adjust the brightness of the light detection
4. The working voltage is 3.3V-5V
5. Ou..
$6.99
Ex Tax:$6.99
>
Features:
- support 5 V / 3.3 V voltage input
- on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection.
- signal detection sensitivity can adjust...
$5.99
Ex Tax:$5.99
Description: Name: MPU-6050 module (three-axis gyroscope + triaxial accelerometer) 2.54mm pin spacing MPU-6050 Accelerometer + Gyro The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, since it contains 16-bits analog to digital conversion hardware..
$8.99
Ex Tax:$8.99
Specifications: Working voltage: DC 3.8V-5.5V Working current (5V): typical current 6mA Input and output signals (3 lines): GND, VCC is power, and VCC is 3.8V-5.5V Obstacle detection time (range from obstacle-free to obstacle-free or obstacle-free to obstacle-free):..
$13.99
Ex Tax:$13.99