NFC PN532 Module RFID Near Field Communication Reader 13.56MHZ for Arduino - products that work with official Arduino boards
- Stock: In Stock
- Model: EB0049194
- SKU: EB0049194
Description:
PN532 module is an NFC(short-range wireless communications technology) module, chip introduced by NXP which applied in 13.56MHZ, contactless communication and highly integrated IC card reader chip, with 40 B ROM and 1kB RAM of 80C51 micro controller core, supports all layers of the protocol regard ISO14443 Type A and Type B.
Features:
1. Reader mode, support ISO/IEC 14443A/MIFARE mechanism
2. Reader mode, support FeliCa mechanism
3. Reader mode, support ISO/IEC 14443B/MIFARE mechanism
4. Card Operation mode, support ISO 14443A/MIFARE mechanism
5. Card Operation mode, support FeliCa mechanism
6. ISO/IEC18092, ECM340 Point to point
Performance Parameters:
In the reader mode, supports Mifare Classic encryption
Supports 212 kbit/s and 424 kbit/s data transfer rate
Under FeliCa mode, support 106kbit/s,212kbit/s and 424kbit/s communication baudrate
Integrates the RF interface of NFCIP-1 the transmission rate up to 424kbit/s
Support Host Interface: SPI interface, I2C interface, serial UART
Power supply: 2.7V~5.5V
Board size: 50mmx120mm
Four positioning holes is M3, hole diameter is 3.25mm
Communication between module:
This module can communicate with each other, the communication system is the default UART, Connect with PC through USB to TTL module, wiring as below:
Direction For Use:
1. First, connect the two PN532 modules with USB to TTL module(PL2303,FT232, etc.) separately, then connected to the computer via USB interface
2. Open the PC software, CORX_NFC_P2P.exe twice. Choose port respectively
3. Respectively choose the initiator side and the target side on two PC software, select content to send in the input port, and click
4. The two PN532 antenna modules close to each other, the computer screen will automatically pop up the received content
Communication With Labels:
Module must be connected to STM32F10X the control panel when the label reading and writing communication, the communication system is the default URAT. More wiring can refer to the instructions in processing routine code.
Writing Description: PD3 pin is buzzer, button pin PC6, PD13, PD14, LED is PA4, PA5, PA6, PA7
Operating instructions:
1. Write label function, press KEY2, D2 status indicator lights. Let label close to the antenna, then you can write data(0xAA) to the label, the buzzer will drops when written successfully
2. Write label function, press KEY3, D3 status indicator lights. Let label close to the antenna, then you can write data(0x55) to the label, the buzzer will drops when written successfully
3. Reading the label function, press KEY1, D1 status indicator lights. Let label close to the antenna, then you can read the data of fixed position from label, if the read out is 0xAA, then lit D4, if the read out is 0x55,then extinguished D4, the buzzer will drops when read successfully
Package included:
1 x NFC PN532 Module
,
,
,
,
,
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
